**This piece is the starting point of the entire series.**
Nine-Nest first created capes and vests for pets, only to realize there was nowhere to hang them. At the time, the workshop already had ear-shaped hooks https://www.pinkoi.com/product/MMdr3uPf for leashes, and following that train of thought, a small hanger was born—75 cm, designed for pets.
There is more to hanging options than just the crossbar. **Leashes can be wrapped directly around the legs of the stand.**
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/IMG_2068-%E7%B7%A8%E8%BC%AF-scaled-1-1024x683.jpg
The sample in the photo is 75 cm. The leash on the left is wrapped directly around the leg. The hooks on the rack are optional accessories.
■ Two wood panels sandwiching a round rod—no wobbling side-to-side
The original method was intuitive: pair the legs, join them with groove-and-tongue joints, and connect the sides with a crossbar.
However, the result was less than ideal. The A-frame legs joined with groove-and-tongue joints **could not stably maintain their open angle**, and required wooden dowels in the middle for alignment. Furthermore, when the crossbar directly connected the side legs, **no matter how tightly it was secured, it would eventually loosen after a while**.
The designer eventually thought of using a clamping fixation method, which fully resolved these issues.
The central crossbar is milled into a round rod, and a semi-circular groove is milled into the connecting point of each leg. By using the semi-circular grooves of the two leg pieces to clamp the round crossbar, and then using a through-bolt to secure all three components, they are held firmly in place. This structure allows the hanger to resist wobbling from both **front-to-back and side-to-side** directions after assembly.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/09/egret-old-design-joint-768x1024.jpg
The old version was made this way. A square crossbar was bolted directly to the A-frame legs from both ends; without grooves to lock them, no matter how tight, it would loosen over time.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/DSC_5804-1024x684.jpg
The ends of the crossbar are round, and the two leg panels clamp it from the front and back. It is the screw that provides the tension, while the semi-circular grooves effectively block side-to-side and front-to-back wobbling.
■ No hardware embedded into the wood
Since two male and female screws are locked directly against each other, there is no need to embed any hardware into the wood. This means we do not rely on the tension of the wood to secure the hardware, so even strong tightening force will not damage the wooden components.
You might not notice the difference at the moment of purchase, but you will feel it over time: even if the threads on the bolts wear out, you can simply replace them with a new set, leaving the legs and the round crossbar completely unaffected. If the hardware were embedded into the wood, you would have to replace the entire leg if it broke.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/DSC_5780-1024x684.jpg
The black part is the head of the through-bolt. It can be removed and replaced as a set.
■ Specifications
Height | 75 cm
Width | Choose from 85/120/160 cm
Base Depth | 35 cm
Legs | Locally produced, solid wood (ash)
Crossbar | Solid wood (beech), 3 cm diameter
Finish | Water-based wood paint; no solvent-based (oil-based) paints used
Hardware | Carbon steel through-bolts. Assembly requires two hex wrenches, which are included
Feet | Black foam tape, provides anti-slip even without silicone foot covers
Shipping | Custom cardboard tube. Arrives as four leg pieces + one crossbar, for you to assemble yourself
Second crossbar | Not available
■ Three checkpoints, controlling formaldehyde at the source
Formaldehyde emissions for artificial boards are divided into three levels, with the local legal threshold set at F3, with F1 being the highest.
Level | Formaldehyde Emission (Average) | What this level means
F1 | ≤ 0.3 mg/L | Highest level, equivalent to Japan's F☆☆☆☆. The best rating for engineered wood furniture
F2 | ≤ 0.5 mg/L | Common level in the local and Japanese market; allowed limit is 1.7 times that of F1
F3 | ≤ 1.5 mg/L | Local legal minimum threshold; cannot be sold if this is not met. Allowed limit is 5 times that of F1
However, the solid wood materials used by Nine-Nest are not on this chart. We have our own standards for materials, glue, and paint.
**First checkpoint | Materials** This table categorizes artificial boards: particle board and wood chips rely on glue compression, which is why formaldehyde is an issue. Nine-Nest uses natural solid wood, which does not require the addition of formaldehyde, so there is no level to assign.
**Second checkpoint | Glue** Natural wood planks are often only a dozen or so centimeters wide; making larger boards requires gluing panels together, and connecting wooden parts also requires glue. We use water-based wood glue for paneling and do not use formaldehyde-based resins.
**Third checkpoint | Paint** Our water-based wood paint was tested by the SGS chemical laboratory in Kaohsiung for formaldehyde, and it measured below the detection limit of 0.1 mg/L (the F1 threshold is 0.3). Report KC/2017/60064A-01, dated June 14, 2017. The tested sample was EPnS environmentally friendly water-based wood paint, not the finished product.
Also, we do not claim the paint is food-grade, as we don't drink water-based paint directly.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/spec_LG-ALL-75CM-120CM-NO-QUICK-1024x1024.png
The figures on the specification diagram are the definitive ones.
■ Add-on items
**Clothes Hooks**: Select these in the options above. The version for pets is the **22 cm** one, available in packs of 3, 6, or 10 (**available for 85 and 120 cm widths**). You can also purchase them individually on the clothes hook page https://www.pinkoi.com/product/pRtSnneS.
There is already a specialized item for hanging leashes: the ear-shaped hook https://www.pinkoi.com/product/MMdr3uPf—the predecessor to the Little Egret.
■ Purchase
Select the desired width and add it to your shopping cart.
If the required height or width is not among the options, please contact us via the "Contact Designer" feature on the site before placing your order; the designer will respond to you personally.
Product Description
Product Details
- Material
- Wood
- How It's Made
- Handmade
- Where It's Made
- Taiwan
- Unique Features
- Customizable
- Stock
- Down to the last 8
- Ranking
- No.694 - Pet Supplies | No.62 - Clothing & Accessories
- Popularity
-
- 11,039 views
- 2 sold
- 110 have saved this item
- Product Type
- Original Design
- Listing Summary
- The 75 cm tall solid wood A-frame hanger is the first piece in the Little Egret series. The crossbar is for hanging clothes, and the legs can be used to wrap leashes around. Available in three widths—85, 120, and 160 cm—and handcrafted locally.
Shipping Fees and More
- Shipping
- Payment method
-
- Credit/debit card payment
- Alipay
- Refunds & Exchanges
- Read more about refunds and exchanges
- Report
- Report this item





















