TG142_want to say/ Masking Tape

◎ Purchase notice ◎ The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order. Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you. The continuous cycle pattern needs to be cut into tape, and it is inevitable that it will be cut the drawing. Some printing peeling will occur during production, which is an unavoidable physical property. Please pay more attention to the use. Shell Light will produce irreversible physical changes (displacement, expansion, spillage, shrinkage) are normal phenomena. Displacement within 5mm are within the normal capacity range. Hot silver for the ambient temperature and humidity requirements are high, in reaching a specific index there will be the risk of Shell Light peeling. The storage time can not be too long, or it will produce hardening ink peeling, and the white atomization after oxidation. As the hot silver is printed on the smooth surface of PET or on top of printing ink, please try to avoid repeated sticking or use scraper , otherwise there will be irreversible physical phenomenon causing ink peeling. ★If you cannot accept the above purchase instructions, please do not order.