●Material: 925 sterling silver
●Size:
The width of the graphic is about 1.2cm, and there are two sizes of rings to choose from
1. Width about 2.0mm, thickness about 0.8mm
2. Width about 2.5mm, thickness about 1mm
●Attention! Please be sure to confirm the ring size and typed content before placing an order, because the products are all made after payment, if you request to change the ring size two days after the order is placed and paid, an additional modification fee will be charged, and the typed part cannot be changed.
●Measurement method of ring circumference & comparison table
The size of the "International Size" in the "Store Form" is the main size when making rings. Please note the required "International Size" when placing an order.
Due to the differences in the size and size values of different countries, if you measure the circumference of the ring in Yinlou or other stores, it is recommended to measure and compare in the following ways to improve accuracy.
✽Measurement method
1. Go directly to Yinlou. Jewelry store and ask the clerk to measure the "international size" size. Note that it is not the size of the United States, Hong Kong, or Japan.
2. Put your own ring on the ruler, measure the "inner ring diameter" of the ring (not including ring thickness), and then compare the "inner diameter" in the table below.
3. Use a non-elastic paper strip or a tape measure to tighten around the "widest point" of the finger you want to wear, and compare the measured length to the ruler to get the "inner circumference". (Because the measurement method of each person will be different, this method has a large error.)
4. Use the NI.KOU ring circumference card to measure, the link is as follows
Reminder:
If your joints are wider than your fingers, please use the joint size as the main factor.
Try measuring your fingers in the evening, when they are at their largest.
Generally, the left and right hands have different finger circumferences.
As fingers will expand with heat and contract with cold, avoid measuring after fingers are cold or exposed to hot water to avoid inaccurate measurements.
●Up to 10 characters can be typed for free (including spaces and symbols)
This style is limited to typing on the inner circle
●The font size is 1mm, limited to English capital letters "ABC...Z" and numbers "0~9"
Symbols are limited to " . " " & "
●Before placing an order, please be sure to confirm whether the ring size and typing content are correct. There are no returns or exchanges for customized products!
This product is "order-to-order", production will start after payment, and it will take an average of 10 production days (excluding holidays and delivery time).
●Because the products are all handmade, there will be hand-made traces, such as asymmetry, the typing interval or the same typing force, etc., there is no way to be as perfect as the machine, the size and knocking pattern will be slightly different from the photo, the inside of the ring There will be an error of +/-0.03cm in diameter, please place an order if it is acceptable.
●Maintenance
The Silver part does not provide repairs. If the jewelry part needs to be repaired, please provide pictures and discuss with the designer. The quotation depends on the damage condition, and you need to pay the round-trip freight separately.
●About our handmade accessories
We use 925 sterling silver and pure copper, each handmade jewelry,
All are completed by the traditional techniques of metalworking - sawing, knocking, carving, welding, filing, inlaying, polishing and other processes.
The handmade texture of welding and forging is retained.
●Knowledge of maintenance
1. All accessories, no matter what material they are made of, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., which will seriously damage the jewelry and cause oxidation, so try to avoid and stay away.
2. It is recommended to wear the jewelry frequently, the oil of the body can make the jewelry produce a natural, moist and beautiful luster.
3. Jewelry will show signs of oxidation, vulcanization or oxidative yellowing and blackening over time. You can use a soft-bristled toothbrush dipped in toothpaste or tooth cleaning powder to lightly brush the surface, or wipe it with a Silver or Bronze cloth to restore it to its original state. metallic luster.
4. If the jewelry adopts special vulcanization treatment, please do not wipe it too much, so as not to lose the effect of vulcanization design.
5. If you are worried that the chemical emulsion of Silver wiping cloth and Bronze wiping cloth will cause skin allergies, you can rinse it with clean water and dry it before wearing it.
6. Natural stones, crystals and pearls can be washed with clean water and then wiped with a soft cloth.
7. When not wearing it, clean it and store it in a sealed bag to reduce the oxidation rate.
8. Do not put all kinds of jewelry in the same jewelry box. Different hardness of jewelry will rub against each other and cause wear and tear.
9. Do not use any other tools to clean your jewelry, as it will leave scratches on the surface of the jewelry. If it is necessary to use a brush, please use a clean or very soft brush to scrub your jewelry.
Origin/manufacturing method
Handmade in Taiwan
●Size:
The width of the graphic is about 1.2cm, and there are two sizes of rings to choose from
1. Width about 2.0mm, thickness about 0.8mm
2. Width about 2.5mm, thickness about 1mm
●Attention! Please be sure to confirm the ring size and typed content before placing an order, because the products are all made after payment, if you request to change the ring size two days after the order is placed and paid, an additional modification fee will be charged, and the typed part cannot be changed.
●Measurement method of ring circumference & comparison table
The size of the "International Size" in the "Store Form" is the main size when making rings. Please note the required "International Size" when placing an order.
Due to the differences in the size and size values of different countries, if you measure the circumference of the ring in Yinlou or other stores, it is recommended to measure and compare in the following ways to improve accuracy.
✽Measurement method
1. Go directly to Yinlou. Jewelry store and ask the clerk to measure the "international size" size. Note that it is not the size of the United States, Hong Kong, or Japan.
2. Put your own ring on the ruler, measure the "inner ring diameter" of the ring (not including ring thickness), and then compare the "inner diameter" in the table below.
3. Use a non-elastic paper strip or a tape measure to tighten around the "widest point" of the finger you want to wear, and compare the measured length to the ruler to get the "inner circumference". (Because the measurement method of each person will be different, this method has a large error.)
4. Use the NI.KOU ring circumference card to measure, the link is as follows
Reminder:
If your joints are wider than your fingers, please use the joint size as the main factor.
Try measuring your fingers in the evening, when they are at their largest.
Generally, the left and right hands have different finger circumferences.
As fingers will expand with heat and contract with cold, avoid measuring after fingers are cold or exposed to hot water to avoid inaccurate measurements.
●Up to 10 characters can be typed for free (including spaces and symbols)
This style is limited to typing on the inner circle
●The font size is 1mm, limited to English capital letters "ABC...Z" and numbers "0~9"
Symbols are limited to " . " " & "
●Before placing an order, please be sure to confirm whether the ring size and typing content are correct. There are no returns or exchanges for customized products!
This product is "order-to-order", production will start after payment, and it will take an average of 10 production days (excluding holidays and delivery time).
●Because the products are all handmade, there will be hand-made traces, such as asymmetry, the typing interval or the same typing force, etc., there is no way to be as perfect as the machine, the size and knocking pattern will be slightly different from the photo, the inside of the ring There will be an error of +/-0.03cm in diameter, please place an order if it is acceptable.
●Maintenance
The Silver part does not provide repairs. If the jewelry part needs to be repaired, please provide pictures and discuss with the designer. The quotation depends on the damage condition, and you need to pay the round-trip freight separately.
●About our handmade accessories
We use 925 sterling silver and pure copper, each handmade jewelry,
All are completed by the traditional techniques of metalworking - sawing, knocking, carving, welding, filing, inlaying, polishing and other processes.
The handmade texture of welding and forging is retained.
●Knowledge of maintenance
1. All accessories, no matter what material they are made of, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., which will seriously damage the jewelry and cause oxidation, so try to avoid and stay away.
2. It is recommended to wear the jewelry frequently, the oil of the body can make the jewelry produce a natural, moist and beautiful luster.
3. Jewelry will show signs of oxidation, vulcanization or oxidative yellowing and blackening over time. You can use a soft-bristled toothbrush dipped in toothpaste or tooth cleaning powder to lightly brush the surface, or wipe it with a Silver or Bronze cloth to restore it to its original state. metallic luster.
4. If the jewelry adopts special vulcanization treatment, please do not wipe it too much, so as not to lose the effect of vulcanization design.
5. If you are worried that the chemical emulsion of Silver wiping cloth and Bronze wiping cloth will cause skin allergies, you can rinse it with clean water and dry it before wearing it.
6. Natural stones, crystals and pearls can be washed with clean water and then wiped with a soft cloth.
7. When not wearing it, clean it and store it in a sealed bag to reduce the oxidation rate.
8. Do not put all kinds of jewelry in the same jewelry box. Different hardness of jewelry will rub against each other and cause wear and tear.
9. Do not use any other tools to clean your jewelry, as it will leave scratches on the surface of the jewelry. If it is necessary to use a brush, please use a clean or very soft brush to scrub your jewelry.
Origin/manufacturing method
Handmade in Taiwan