Teapot
1240 ° C high temperature kiln burning, internal glazed style,
After high-temperature kiln burning, there is no glaze dissolution when using hot water, and it is absolutely safe in terms of health.
The advantage of internal glazing is
The tea soup is more fragrant and the tea soup does not run into the pores of the body.
When you drink other kinds of tea, the body will not leave a taste of tea.
👉 Cleaning is easier and it is not easy to get tea stains.
✨ 身 body craft features
7Using 7 holes of water to effectively prevent tea from flowing out, no need to install spout filter.
The sputum is thin and has a spout. The water is smooth and the water is broken. It is not easy to drool.
The body of the pot is light and smooth, and it does not sink.
Handmade purely, it is not a lot of filling.
Tea sea
1240 ° C high temperature kiln burning, internal and external glazing style,
After high-temperature kiln burning, there is no glaze dissolution when using hot water, and it is absolutely safe in terms of health.
It is easy to clean the glaze inside and outside, and it is not easy to get tea stain.
When you brew other kinds of tea, you will not have the taste of a tea.
✨ production process features
👉 刀 knife method style.
The narrow mouth design, the tea soup keeps warm, the tea fragrance does not drift.
The water outlet is made by hand-pinching and shaping.
The water is smooth, the water is broken, and it is not easy to drool.
The embryo body is light and smooth, and does not sink.
🍵茶仓
1240 ° C high temperature kiln burning, external glazing style,
After the high temperature kiln is burned, there will be no harmful substances dissolved when the tea leaves are placed, and the health is absolutely safe.
👉Put the tea into the warehouse and place it in a cool, ventilated place.
Let the air slowly transform the taste of the tea to make the flavor more mature.
Do not be careful not to place it in a damp, non-ventilated or sunny place to avoid mold or deterioration of the tea.
👉 Small and convenient, good to carry.
Tea tray
1240 ° C high temperature kiln burning, the overall glazed style,
After high temperature kiln burning, there will be no harmful substances dissolved during use, and it is absolutely safe in terms of health.
👉 Two-piece, separable style.
👉 Use cleaning to make it easy.
The tea table can be picked up, no tea stains, no dead ends.
You can also pick up the tea table and use it for the lid. Place the teapot directly in the tea tray and brew it.
It has a loop-foot design and is not easy to slip when cleaned.
🍵水方
1240 ° C high temperature kiln burning, the overall glazed style,
After high temperature kiln burning, there will be no harmful substances dissolved during use, and it is absolutely safe in terms of health.
Made from hand-cut, it is uniquely Zen-like.
👉 Lightweight and convenient, easy to carry.
The bottom of the crucible is flat and can also be used as a tea bowl.
👉 Wide mouth design, tea soup cools quickly, does not burn.
It has a loop-foot design and is not easy to slip when cleaned.
Every side looks similar but different.
Tea cup
1240 ° C high temperature kiln burning, the overall glazed style,
After being burned in a high temperature kiln, there is no possibility of harmful substances being dissolved during use, and it is absolutely safe in terms of health.
👉 Manual cutting, unique and full of Zen.
👉 Wide mouth design, tea soup cools quickly, does not burn.
👉 Light and easy to carry.
The cups look similar but different.
🗿 Size:
⭐Teapot: about 14.5cm long and 9.8cm high
⭐茶海约: length 13.5cm, width 9.5cm, height 10cm
⭐ tea warehouse: Ø 10cm* height 5.8cm
Tea tray: Ø 18cm* height 4.3cm
⭐ tea bowl about: Ø 11.8~12cm* height 6.8~7cm
⭐ tea cup approx.: Ø 6.5cm* height 4.2cm
⭐ tea cup holder: length 8cm, width 8cm, height 1cm
🗿 Capacity:
⭐ Teapot about 260cc
⭐茶海约360cc
⭐ tea warehouse is about 170cc
⭐ tea bowl about 440cc
⭐ tea cup about 70cc
🗿Material:
Clay pottery
🗿 Maintenance method:
清洗 Please use sponge and soft detergent and clean water
⭐ Do not put it directly on the open flame and the temperature difference between the hot and the cold is too large.
🗿 Warm reminder:
⭐Each piece of work is handmade, non-machine-filled, and there will be some slight differences, and it is acceptable to place another order.
There are small dots on the work, and the glaze is normal, which does not affect the use and safety.
The enamel enamels are fired at high temperatures and will not release harmful substances to the body.
颜色The color of the product image will be different depending on the screen settings, mainly based on the actual product color.
🗿 Origin and manufacturing methods:
Handmade in Changhua County, Taiwan
🗿Each piece of work is stamped or hand-carved
Product Description
Product Details
- Material
- Pottery
- How It's Made
- Handmade
- Where It's Made
- Taiwan
- Popularity
-
- 856 views
- 10 have saved this item
- Product Type
- Original Design
- Listing Summary
- Hello, if you have special needs, please feel free to ask.
Shipping Fees and More
- Shipping
- Payment method
-
- Credit/debit card payment
- Alipay
- Refunds & Exchanges
- Read more about refunds and exchanges
- Report
- Report this item