Maintenance salt bricks I Small salt iron I Himalayan natural rock salt I Hot compress cycle I Salt lamp mother

**【Specifications】** Style: Rose Salt mine origin: Pakistan Himalayan mining area Total weight: about 550g Dimensions: approx. 11 x 6 x 7.5 cm **Patent size: M586152** ＊Sold randomly, pictures are for reference only **Accessory specifications—** Bulb: 10WE12 lamp holder Wire: Trim switch wire https://live.staticflickr.com/65535/53374236156_fcee922b55_b.jpg https://live.staticflickr.com/65535/53374376788_03c8c746dc_b.jpg **Small salt iron｜Patented design Product size: M586152** The main body is made of lightweight rosewood. The design is of a moderate size and can be picked up with one hand to apply heat to various parts of the body. It allows you to apply heat to the whole body whether in the office or at home, and to dehumidify and metabolize anytime and anywhere. The clear color of the wood matches the pink-orange luster of the rose salt, which looks warm and cozy. The small salt brick emits a soft luster, making it a beautiful salt lamp when you leave it alone when not in use. **Usage** After turning on the power, it is recommended to fine-tune the knob to the highest temperature. After it is heated, be sure to touch it with your hands to see if the temperature is suitable to avoid overheating and burns during use. If the salt iron is overheated, please lower the temperature of the fine-tuning wire and let the salt iron cool down slowly, and then start using it again when the temperature is suitable. Since the temperature of salt changes slowly, it will be affected by the temperature of the environment in which it is used. In addition, everyone's body temperature is different. I remind you again that you must touch it with your hands before use and adjust it to a suitable temperature before use. **※Note※ Do not keep the temperature high for a long time or block the heat dissipation holes during salt ironing. If you do not use it temporarily, here are two methods for your reference:** Adjust the temperature to low, let the small salt iron maintain a little temperature to avoid deliquescence, and you can also enjoy the lighting (use the 10w bulb 24 hours a day every month, the electricity bill will not exceed 30 yuan) Cling film sealing - You can turn off the power of the small salt iron, wrap it in cling film after cooling, or put it in a sealed zipper bag and close it tightly to prevent the salt from combining with moisture in the air and causing deliquescence, which may even cause the lamp unit to break. When using, be careful to avoid tangles in the wires. Over time, the Bronze at the end of the wires may be exposed, causing the bulb to not light up and reducing safety. After use, the wires should be straightened out and stored. https://live.staticflickr.com/65535/53374548344_9cae5bff9e_b.jpg https://live.staticflickr.com/65535/53374413588_32836018dd_b.jpg **What should I do if "the light stops working" after using it for a period of time?** Unscrew the screws and remove the wooden edge, take out the cord set and check whether the bulb turns black or the tungsten filament is broken. If so, replace the tungsten filament bulb. *The use time of the light bulb varies, which may be affected by the local current stability or the frequency of tungsten filament shaking. There are many reasons. It is a consumable product. If there is no above phenomenon, please check whether the bulb is loose (please tighten it), whether the fuse in the plug part is damaged and turned black (please replace it), and whether the fuse pops up causing poor contact (please reinstall it). https://live.staticflickr.com/65535/53374416883_7edd9c17a1_b.jpg https://live.staticflickr.com/65535/53374416903_b4f4308a2e_b.jpg **Precautions** Each type of salt ironed salt brick is a unique natural ore, and the shape, color, size, and texture will not be exactly the same as the picture. The product pictures are for reference only. If you want to choose in person, please go to each store to purchase. Textures, ice patterns, mineral defects and sediments on the appearance of salt bricks are all normal phenomena and are not product defects. Due to the hot and humid climate in Taiwan, it is recommended to light the lamp 24 hours a day to avoid deliquescence of the salt lamp. The wires used in the product have passed the inspection by the Taiwan Commodity Inspection Bureau, and the quality is guaranteed. Please use it with confidence. Because the tungsten filament bulb is used, the heating effect is good. When replacing the bulb, please confirm the surface temperature of the bulb first, or wrap it with a towel to insulate it before replacing it. Please be sure to place this product on a flat ground and do not pull the wires hard to avoid poor contact. Salt bricks are made of natural material and will cause wear and tear after being used for a long time. If cracks or thinning occur, please evaluate whether to continue using them. If you need to replace them, please contact our customer service or store personnel to maintain safety in use.