Wooden IC card case [Autumn] Walnut

Created by laser cutting and hand finishing, It is "wooden IC card case". Easy structure just to remove cord through putting in and out of card! Although it is not suitable for usage which puts and removes the inside card frequently, It is for non-contact IC cards such as "suica", "pasmo", "nanaco". When charging, remove the cord and slide your finger into the hole in the center We devise it so that you can easily put in and out. Since it is a structure locked with a string, worry of dropping only the card is useless! ! Of course, you can pass the ticket gate while keeping it in the case! Just place it for charge! ! A combination of digital processing and analog processing well With the high processing precision of the laser processing machine close to the warmth of the natural tree! ! Wood is the world's three biggest walnut walnuts! There are maples, leaf designs of autumn etc I carve a different shade of timber and embed it in it. Used wood includes mahogany, mulberry, Hawaiian core, walnut etc. Finish safe even if you lick the finish of natural ingredients oil! ! It feels good to the touch! The surface becomes water repellent. ■ Size is 67 x 103 mm Thickness is around 7.5 mm The structure is a laminate of three veneers. ■ Compatible Card Size 55 × 87 mm Card Up to 1 Confirmed cards "suica" "pasmo" "nanaco" If others are similar cards it seems okay. ■ Strap Flat Flat cord Width 3 mm Length about 17 cm with Plavies (There are some errors) 【Notes】 ※ Photo IC card is for shooting. ※ The picture is slightly different grain of the goods delivered for shooting, Because it processes with laser, the design is exactly the same. Because it is making from the same wood, it will be almost similar feeling. Please note. Production area / production method Saga Japan / hand made