The seal of the pig's handbook
| Printing surface: about 3cm
| Ink: Black
Photosensitive seal, with a bottle of supplementary ink!
Cute healing♡
How to add printing oil:
1. Open the photosensitive seal and printing oil, and drip the printing oil evenly on the pattern in a gentle way.
2. Leave the seal for about ten minutes and wait for the oil to be evenly absorbed.
3. Use a paper towel (toilet paper will have cotton lint, and you can use a paper towel that does not remove dandruff) to wipe off the excess printing oil on the surface.
4. Stamp several times on the waste paper. It is normal for the ink to be uneven at the beginning. Just stamp it a few more times!
5. Until there is no excess ink overflow and the picture lines are clean, you can cover where you want to cover.
Provide another way to add printing oil:
This way of printing oil is large and the waiting time is long. You can add it according to your usual way!
1. Rotate the handle part of the seal, and gently remove the white column inside.
2. Drop the ink to the black part of the round centre, and wait for 3-5 minutes to be absorbed before adding.
3. Repeat this action several times until the printing oil completely penetrates into the photosensitive seal, and you can test it on the waste paper while adding it.
4. This method is to add printing oil to the back of the photosensitive seal, so that the printing oil penetrates completely into the seal surface. It will be necessary to add more printing oil, but it can be maintained for a long time, and it can also be used with the refuelling method above.
| Printing surface: about 3cm
| Ink: Black
Photosensitive seal, with a bottle of supplementary ink!
Cute healing♡
How to add printing oil:
1. Open the photosensitive seal and printing oil, and drip the printing oil evenly on the pattern in a gentle way.
2. Leave the seal for about ten minutes and wait for the oil to be evenly absorbed.
3. Use a paper towel (toilet paper will have cotton lint, and you can use a paper towel that does not remove dandruff) to wipe off the excess printing oil on the surface.
4. Stamp several times on the waste paper. It is normal for the ink to be uneven at the beginning. Just stamp it a few more times!
5. Until there is no excess ink overflow and the picture lines are clean, you can cover where you want to cover.
Provide another way to add printing oil:
This way of printing oil is large and the waiting time is long. You can add it according to your usual way!
1. Rotate the handle part of the seal, and gently remove the white column inside.
2. Drop the ink to the black part of the round centre, and wait for 3-5 minutes to be absorbed before adding.
3. Repeat this action several times until the printing oil completely penetrates into the photosensitive seal, and you can test it on the waste paper while adding it.
4. This method is to add printing oil to the back of the photosensitive seal, so that the printing oil penetrates completely into the seal surface. It will be necessary to add more printing oil, but it can be maintained for a long time, and it can also be used with the refuelling method above.