PS222_Orange / Masking Tape

◆PS241 (Weight：95 grams) ◎ Purchase notice ◎ The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order. Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you. The continuous cycle pattern needs to be cut into tape, and it is inevitable that it will be cut the drawing. Some printing peeling will occur during production, which is an unavoidable physical property. Please pay more attention to the use. Iridescent Sheen will produce irreversible physical changes (displacement, expansion, spillage, shrinkage) are normal phenomena. Displacement within 5mm are within the normal capacity range. Iridescent Sheen for the ambient temperature and humidity requirements are high, in reaching a specific index there will be the risk of Spot Varnish peeling. The storage time can not be too long, or it will produce hardening ink peeling, and the white atomization after oxidation. As the Iridescent Sheen is printed on the smooth surface of PET and on top of printing ink, please try to avoid repeated sticking or use scraper , otherwise there will be irreversible physical phenomenon causing ink peeling. ∣Size∣One Roll,6cm*10m (180cm Loop) ∣Material∣Matte-finish PET Tape With Release Paper, Re-stickable ∣Printing∣Partial White Ink (No Light Transmission Effect) ◆PS241(Weight：95 grams) ∣Size∣One Roll,6cm*10m (180cm Loop) ∣Material∣Washi Paper Tape With Release Paper, Re-stickable ∣Printing∣Partial White Ink (No Light Transmission Effect) ◎ Purchase notice ◎ ◎This photo is matte.◎ ◎The bright fog printing is the same only with or without light transmission effect.◎ The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order. Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you. Please reduce the time you tear off the masking tape to prevent the foil peel off. Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you. Since the continuous loop diagram needs to be connected to the end, physical peeling and falling off will inevitably occur during use. Please pay more attention when using it.