[Zhongbao Disaster Prevention Technology] Electric motorcycle fire blanket

[Electric motorcycle fire blanket] ▲Lithium batteries are difficult to destroy. Let the fire blanket help you control the damage. ▲The fire blanket comes from TEXFIRE (originally imported from Spain), the world's leading fire protection manufacturer. ▲ Designed for electric vehicle fires, it has been inspected by SGS and passed the CNS10285 A4 method test standard, which is the first level of flame protection. ▲It can quickly block the fire, effectively avoid the spread and spread of the fire, and reduce the damage rate caused by the fire before the firefighters arrive. ▲Easy to operate, completely covering the vehicle with the fire blanket can effectively prevent the spread of fire, reduce smoke and heat hazards, and reduce fire-fighting water consumption. ▲Facing the advent of the era of electric vehicles and ESG, this product will be your ideal choice. ▲This product is only suitable for "initial fires". It can be used as soon as the fire starts. When the fire gets bigger, please be sure to evacuate the scene first and hand it over to professional fire fighters for follow-up treatment. [Product Features] 1. The fireproof blanket is made of glass fiber, and the double-sided outer layer is covered with flame-retardant polymer (high temperature resistant coating, which can withstand high temperatures of 1000~1200 degrees C) 2. It can block external oxygen and prevent the fire from spreading and harming surrounding vehicles or buildings. 3. Fire blankets can effectively reduce the harm of toxic gases and smoke produced by fires. 4. Reduce the damage caused to surrounding vehicles, people, and the environment due to thermal runaway caused by continuous combustion of the battery. 5. Applicable to most motorcycles, heavy-duty motorcycles, electric bicycles, scooters, battery modules, etc. 6. It enjoys a 3-year warranty. If used during the warranty period, it can be replaced for free with a fire certificate. 7. The fire blanket can be effective for up to 10 years if properly stored. 【Commodity Inspection】 1. After testing by the Textile Research Institute, according to CNS12915, the tensile strength reaches more than 4000N/5cm, and the maximum tensile strength reaches more than 6000N/5cm. 2. After SGS testing, it is flameproof level 1 according to CNS 10285 A4 method. 3. Tested by APPLUS laboratory in accordance with the European inspection standard EN 13501-1, the results are as follows: Class A2 - effective fire protection; s1 additional level - good smoke blocking effect; d0 Additional Class - No burning drippings/particles. 4. The oxygen limiting index was tested by SGS and according to the ASTM D2863:2019 method, the Oxygen Index (OI) is greater than 60% (above 27 means flame retardant). 5. Tested by SGS and passed the inspection according to the European fire blanket inspection standard EN 1869:2019 Clause6 6. Tested by SGS, it is heat-resistant to 1200 degrees C and does not burn for 2 consecutive hours. 【Product Specifications】 Fire blanket material: fiberglass, the outer layer is covered with flame-retardant polymer, and can withstand high temperatures of 1000~1200 degrees C. Fire blanket size: 4 × 6 meters, weight about 12 kilograms, thickness 0.41-0.43 mm, and a handle at each of the four corners. This item comes with a red waterproof storage bag. Validity period: The validity period can be up to 10 years if stored properly. Origin: Spain. 【Notes】 1. The lithium battery of the electric motorcycle is located under the car or on the pedal, and the fire will spread upward. The fire blanket must completely cover the car body to prevent the fire from spreading to achieve the blocking effect. 2. The banner of this product is about 4 meters, and the operator should be about 1 meter away from the burning vehicle when operating. It is recommended that the minimum safety protection configuration during operation is a full-face respiratory protective mask, flame-proof gloves, and insulated rain boots. 3. This product is not a fire extinguishing product. Its main function is to suppress the spread of fire. It is only suitable for "initial fires". It can be used as soon as the fire starts. When the fire expands, please be sure to evacuate the scene first and hand it over to professional fire fighters for follow-up treatment.