D&M automatic induction Stainless Steel liquid soap dispenser (soap liquid)

Simple and neat design elements add to the taste of home life, and the three-stage adjustable automatic soap (liquid) supply design makes cleaning convenient and elegant. product specifications ■ Product model: M809001501664 ■ Product material: SUS304 Stainless Steel, ABS plastic ■ Size: 116x72x187mm ■ Weight: 507g ■ Capacity: 270ml ■ Waterproof level: IPX5 ■ Working humidity: 0%-95%RH ■ Working temperature: 5-40°C ■ Rated voltage: DC3.7V ■ Charging voltage: DC5V 0.8A ■ Number of uses: ≥50,000 times ■Soap form:**Liquid soap (not foam and mousse)** __**Instructions**__ 1. Use Type-C charging cable to charge until the blue light lights up for a long time. 2. Press the upper liquid cap, pop it up and pull it out gently. 3. Add 270ML cleaning fluid and put the liquid cap back into place. 4. Press and hold the power button for 2 seconds to boot. 5. After wetting your hands, reach out to the sensing area to receive an appropriate amount of soap (if you remove your hands midway, soap dispensing will stop). 6. Use liquids: hand sanitizer, cleaning liquid, shower gel, shampoo (if it is too thick, it will affect the operation of the machine, it is recommended to use higher fluidity content). __**Power key switch**__ 1. Press and hold for two seconds: power on/off 2. Short press to adjust the gear: short press once: low range, short press twice: mid-range, short press three times: high range. __**Cleaning/Maintenance Method**__ 1. After turning off the phone, gently wipe the surface with a wet towel. 2. If it is not used for a long time, please remove the internal liquid first and charge it once every two months. 3. Please place it in a dry and cool place, away from moisture, direct sunlight, and heat sources. 4. Cleaning mode: After adding warm water, click the power button twice to enter the cleaning mode. 5. The product charging hole must be tightly plugged with a waterproof plug during non-charging periods, and do not come into contact with any liquids or detergents. __ __ https://live.staticflickr.com/65535/52901951619_5ca42995d2_o.jpg __**D&M Fragrance Moisturizing Hand Gel 300ml Add-on Purchase Promotion**__ When you purchase D&M**Liquid Soap Dispenser Series**(any model), you can purchase the**Fragrance Moisturizing Hand Wash 300ml**series at a discounted price [Original price] NT $180 [Additional purchase price] NT $150 **Add-on purchase discount → https://www.pinkoi.com/product/2qAhBn9b** If the product is out of stock or due to other force majeure, Pinkoi DAVID & MAISIE reserves the right to adjust various rights and interests without prior notice. __ __ __**Precautions**__ 1. Do not immerse the machine in water or clean it directly with water to avoid short circuit. 2. Please do not use liquids containing granules, powders, etc. to avoid normal soap dispensing. 3. When charging is completed, please insert the waterproof plug into the charging hole to avoid moisture inside. 4. Please use the original cable for charging. 5. Do not place it upside down or tilted when there is still liquid in the machine. 6. During the use of the machine, be sure to cover the liquid cap to prevent air from entering and causing the liquid to condense and become difficult to flow. 7. Do not block the exit with your hands or objects. 8. When there is a foreign object blocking the sensing area, the red light will continue to flash for five seconds. Please shut down the device first and confirm that the foreign object has been removed and the outlet is clean before turning it on. 9 When the battery is low, the red light will flash three times to remind you to charge. 10. If the machine is not used for a long time (more than a month), you can add warm water and click the power button twice to enter the cleaning mode. Drain all the liquid before shutting down and storing it. 11. Under normal use, it will automatically enter standby mode without shutting down. 12. Children should be used under the supervision of an adult to avoid contact with the eyes and accidental ingestion of liquid soap. 13. The seven-day appreciation period is a hesitation period and not a trial period. If you need to return the product during the appreciation period, the product must be complete, unused, and the packaging can be restored before it can be returned. If there are traces of use or additional restoration is required, a new fee (30% of the list price) will be charged. __**Troubleshooting Methods**__ 1. Unable to turn on → Please charge it carefully to ensure the power is running. 2. The indicator light does not light → Please confirm whether the power on has been completed. 3. No liquid comes out → Please confirm whether the internal liquid has been used up and needs to be refill. 4. The red light keeps flashing → Please confirm whether the countertop is reflective or whether there is any foreign matter at the sensor. __**Warranty Content**__ ■ The product warranty period starts one year from the pickup date/arrival date. ■ Abnormal conditions occurring in the product itself under normal use. ■ When the product meets the return and exchange conditions for non-human use, please be sure to send back the product itself (including all original contents such as the product carton, charging cable, manual, etc.). If any of them cannot be returned, it will not be returned. Exchange service provided. ■ During the warranty period, if non-human damage meets the warranty definition, the shipping cost will be borne by both the customer and the company. If it is determined that the product is damaged due to improper use, no replacement will be provided and the return shipping fee will be borne by the consumer. bearer's burden. ■ The one-year warranty (starting from the date of arrival/pickup) does not cover the following areas: 1. Products should use the products recommended in the product description. If the machine is damaged due to adding non-recommended contents, exchange will not be possible. 2. Warranty will not be provided if the product does not have proof of purchase, order number or serial number does not match the actual product. 3. Normal wear and aging of exterior parts and consumables after use, such as surface problems such as coating peeling and fading. 4. Improper use, such as damage to the casing, falling, damage, or soaking in water. 5. Any damage caused by exposure to extreme temperatures, solvents, acids, water, fire, etc. 6. Natural disasters, such as typhoons, earthquakes, and floods. 7. This warranty does not apply to second-hand resold products. __ __ __**Warranty Login:**__ Received product**warranty card included**. If you have not received the warranty card, please__**contact the designer**__. ①Please scan the QR-CODE on the warranty card to enter ②**Register/Login**Official website member ③Fill in the required information on the**[Product Warranty Login]**page **Completion and enjoy product warranty** ✱If you have any login problems, please__**contact the designer**__or scan the warranty card QR-CODE at the bottom of the page**call to inquire** __ __ __**Warranty Evaluation Process:**__ 1. Please contact us through the contact designer or order message window. 2. Please provide [Order Number], [Problem Product] and other information, and be sure to attach the problem information [Photo/Video] at the same time. 3. After the designer confirms the case, please send the product to the designated address. (Please note: Products must be sent in complete packaging, including product outer box, accessories, manuals, gifts, etc. All contents must be sent back at the same time) 4. After receiving the product, we will evaluate whether it qualifies for warranty. After the evaluation is completed, we will proactively inform you via the original contact information. 5. If the product meets the warranty and exchange conditions, we will send the new product to your designated address;**If the product does not meet the warranty qualifications, we will charge you a delivery fee and assist in sending it back to the designated address.** __ __