<material> Polyester fiber + 嫘萦 Front thermal transfer & back self-adhesive & edge treatment <size> 4.6cm* up and down 4cm <Packing specifications> 8.8cm* up and down 8.3cm <How to use> method 1 When used directly as a sticker, it can be applied to paper or articles. If you want to be more firm, you can put a thin cotton cloth on it and use the front part of the iron to apply it. Method 2 If it is adhered to the cloth, put a thin cloth to protect the embroidery piece. The temperature of 110 °C is about 15-25 seconds. You can use a little force, then turn the clothes over and burn it again from the back. Wait until it is cooled. It is completely fit. Do not move until it has cooled down. It is recommended to be seamed when it is applied to elastic material or three-dimensional fabric. ‧Sublimation hot stamping will fade slightly after repeated washing is a normal situation ‧The time of ironing will vary depending on the fabric ‧Not applicable to hot, nylon, satin, leather, sweater, water repellent, moist or flammable materials ‧ There are some color differences on the screen. If in doubt, please ask.