【Timemore】Taimo coffee small T digital display electronic thermometer hand brewing pot coffee thermometer

**Legally authorized agent in Taiwan, guaranteed to be authentic and have guaranteed after-sales service.** ⚠️**The built-in 2032 battery is a consumable and needs to be purchased separately**⚠️ The water temperature of hand-brewed coffee is very important, as it will affect the dissolution of soluble substances in the coffee powder. Usually the ideal water temperature is 90.5°C ~96°C. If the temperature is too low, extraction will be reduced and the flavor of the coffee will be lighter or more acidic; If the temperature is high, the extraction will increase, and the flavor of the coffee will be stronger (sweet or bitter). At this time, if you have****, This ensures consistent brewing temperature and more stable flavor, making it a worthwhile investment. **A pointer thermometer is also available** https://www.pinkoi.com/product/VFhrEKZd **Features** 1. Celsius or Fahrenheit can be quickly switched. 2. Obtained European CE safety certification. 3. The clear digital display on the screen is immediately visible. 4. It can directly measure the water temperature and accurately control the temperature. 5. The lowest temperature measurement is -20°C, and the highest temperature measurement is 120°C. 6. Pair with Taimo related hand brewing accessories (Yu 03/Yu Youth/Yu Pure hand brewing kettle). 7. Using laboratory high-precision fast display chip, the measurement accuracy reaches 0.1°C within 100°C. **product specifications** Product name: Small T digital display electronic thermometer Accuracy: 0.1°C (within 100°C) size: Dial diameter 43.5mm, height 14mm Probe diameter 3.5mm, height 115mm Material: 304 Stainless Steel, ABS, LED liquid crystal (CR2032 button battery) Total weight: 22.6g Packaging size: 15x5x5 cm Weight including packaging: 30g Temperature range: -20~120°C **Things to note** 1. Cannot be used inside an oven or microwave. 2. Do not use the thermometer outside the measuring range. 3. When the battery is exhausted, please replace the battery according to the instructions. 4. When measuring, the depth of the probe inserted into the liquid should not be less than 5cm. 5. Please clean it immediately after use to avoid affecting accuracy. 6. The end of the temperature probe contains spikes, please pay attention to safety when handling and using it. 7. Do not wash or soak the display screen in water, nor wash it in the dishwasher. 8. Continuously boiling hot water will have a temperature of 100°C **9. The hot water from our commonly used water dispensers is usually measured at only 70-80°C. It’s not because the thermometer is inaccurate!!!** **Q&A** Q: Why does the temperature of boiling water not reach 100°C? A: Depending on the altitude of the region, the higher the altitude, the lower the air pressure, and the lower the boiling point. In addition, because the boiling water is not in a sealed boiling space, most of the steam will go upward. Therefore, it is normal to measure an approximate temperature of 98-99°C in the boiling state. Q: Why is the temperature of newly boiled water poured into a hand brewing kettle only 90°C when measured, or sometimes even less than 90°C? A: Since the hand brewing kettle is at room temperature, after hot water is added, the container will absorb heat. If less water is added, the temperature will be lower. Q: Why do the numbers displayed when using a Taimo thermometer differ from those of other brands? A: The measurement of digital thermometers is based on relative values, so there may be a difference of about 1-3 degrees compared with other thermometers. The usual reasons are: 1. Sensor calibration: Different brands or models of thermometers may have different internal calibration standards, so the readings may be slightly biased. 2. Usage: Different sensor locations or contact times may affect the measurement results. Q: Why do the numbers during temperature measurement sometimes jump irregularly? A: Large jitter may be related to the following factors: 1. Sensor sensitivity: This thermometer sensor is designed to respond quickly to small temperature changes. When the liquid temperature is naturally cooling, the displayed value may change rapidly. This is due to the high sensitivity of the sensor and is not a product fault. 2. Environmental factors: The ambient temperature of the liquid (such as room temperature, airflow) will affect the stability of the reading. https://static.wixstatic.com/media/f5f31c_2afe99dc3c804ea9888f5ee6062d2cd9~mv2.jpg https://static.wixstatic.com/media/f5f31c_2ece5d49153f40069e1f4fdd593a99c7~mv2.jpg https://static.wixstatic.com/media/f5f31c_5bf87cd41cb04cb2927328e9005594e9~mv2.jpg https://static.wixstatic.com/media/f5f31c_6e6c578e25a7447b9afbb03ab0924a37~mv2.jpg https://static.wixstatic.com/media/f5f31c_0cfd6e29ddf94de9b5fe180b629be835~mv2.jpg