Pre-order FUJIFILM instax mini EVO camera and see the print camera now - black

https://www.youtube.com/watch?v=tGYNV7AGWOE&t=2s **Product Specifications** 1. Camera Features 1/5 inch CMOS sensor with primary color filter Recording pixels: 2560 x 1920 Storage media built-in memory, microSD/microSDHC memory card Storage capacity: Built-in memory can store about 45 images microSD/microSDHC memory cards can store approximately 850 images per GB Recording method compatible with EXIF version 2.3 DCF format Focal length f=28mm (equivalent to 35mm focal length) Aperture F2.0 Autofocus: One-shot AF (with AF illuminator) Shooting distance: 10cm~infinity Shutter speed 1/4 second ~ 1/8000 second (automatic switching) Sensitivity ISO100~1600 (automatic switching) Exposure Control Program AE Exposure compensation -2.0EV~+2.0EV (1/3 step) Metering method: TTL 256 split metering, multi-metering White balance automatic, sunny, cloudy, fluorescent light 1, fluorescent light 2, fluorescent light 3, incandescent bulb Flash auto flash/forced flash/flash off flash Flash shooting range: About 50cm~1.5m Selfie approx. 2 sec. / approx. 10 sec. Shooting effects: 10 lens effects, 10 film effects The above effects can be combined into 100 effects 2. Print function Printing pixels: 1600×600 dots 800 x 600 dots when printing from a smartphone Print resolution: 25 dots/mm x 12.5 dots/mm (638x318dpi, 40×80μm dot pitch) 12.5 dots/mm when printing from a smartphone (318dpi, 80μm dot pitch) Printing color gradation: 256 levels per color (RGB) Printable image format: JPEG Printing time: Image received to photo output: about 16 seconds * Add 7 seconds when printing in instax-Rich mode immediately after startup. Print function can print images from built-in memory and memory card Reprint You can reprint the images stored in the history (up to 50 images) 3. Others Smartphone application related functions Image printing, remote shooting, image transmission and printing, firmware upgrade LCD screen 3.0 inch TFT color LCD screen Number of pixels: Approximately 460,000 dots External interface Micro USB Micro-B (charging only) Power supply: built-in lithium battery (not removable) Built-in charging function Printable sheets: Approximately 100 sheets (fully charged) * The number of prints may vary depending on usage conditions. Charging time is about 120~180 minutes * (Varies depending on temperature and remaining battery charge) Main unit dimensions 87 mm x 122.9 mm x 36 mm (excluding protruding parts) Main unit weight: about 285 g Operating ambient temperature: +5°C to +40°C Humidity: 20% to 80% (no condensation) Photo paper used: Instant photo paper instax mini (sold separately) Product specifications may change without notice due to product improvement. Due to differences in monitors, the actual product may have slight color deviation compared to the image. QR CODE is a registered trademark and word mark of DANSO WAVE Co., Ltd. The Bluetooth® word mark and logo are registered and owned by Bluetooth SIG, Inc. and Fujifilm Corporation may use them only under license. 【Notes】 ✱Return instructions during the appreciation period: Once the packaging is unpacked, except for new product defects, No returns or exchanges are accepted (exchanges for new defective products must be determined by the original manufacturer) ✱The color of the product image may vary slightly due to differences in computer screen settings, please refer to the actual product color