Extremely designed driving safety sticker

✏︎ Extremely designed driving safety Approx size: 16*8.5 cm ☆☆☆☆☆Car stickers construction precautions⬇️⬇️⬇️ Tools: rag or alcohol wipe, scraper or credit card, dry clean towel or rag 1. Use a special towel to clean the car body, air-dry or blow-dry, and keep it dry. There should be no dirt, oil stains, and Wax. 2. After determining the position to be pasted, slowly scrape the backing paper while pasting with a tool. 3. If the car sticker is not large, you can also tear off the transparent film and the sticker together and stick it again (it will be easier to tear it slowly in the reverse direction), but you must be careful not to stick to each other. ✏︎ The transfer film is a weak sticker, it can't completely stick the sticker, but it is easy to repost, so it needs to be peeled off slowly. ✏︎ There must be a sticker attached to the release paper, which needs to be returned a little, and then slowly glued. The designer's work has always been detailed stickers, and I don't want the general large stickers, so it must be difficult to get started. 4. After pasting, scrape and press it several times, in the same direction. Then peel off the transparent film.