Pressed glass-Dingli incense holder

Made of three types of pressed glass, it forms a small landscape with crabapple flowers, cross and Silver glass. If you like collecting pressed glass, don’t miss this! Incense holders are divided into two types: with incense base (long) and without incense base (short). The incense holder with incense foot is deeper and the incense holder hole is smaller. For incense sticks without incense bases, such as Japanese incense sticks, it is recommended to use a short incense holder with larger holes. Incense holder dimensions: length x width x height = 4 x 4 x 2.7 cm Incense foot version (long): 1.7 cm deep, small hole diameter Unscented foot plate (short): 0.7 cm deep, large hole diameter Material: glass, solder, Bronze The incense in the photo is just a schematic diagram, no incense is included. Please use your favorite incense! Maintenance tips: Incense without a foot will accumulate tar at the entrance after burning. You can scrub it with a detergent such as dishwashing liquid and then hang it upside down to dry. Do not keep the Bronze part of the incense holder in contact with water for a long time to avoid metal oxidation. You can wipe it with Bronze oil to restore its gloss. The outer edge of the inlaid glass is solder. If the color becomes darker after long-term use, it will become brighter by brushing gently with a sponge or toothbrush! The incense holder is made of recycled pressed glass. Most pressed glass has been discontinued due to the uneconomical production process, but Za Ran has preserved the beauty of pressed glass in different ways. The depth of the glass embossing will vary slightly from piece to piece with the color of the glass itself. In addition, because the inlaid glass is hand-cut and polished, there will be slight discrepancies in size. Please place an order if you can accept it. The mosaic glass is hand-cut, ground, and welded, and then framed with tin. Although inlaid glass is stronger than ordinary glass, it should still be avoided from collision and falling. Lead-containing solder is used and food should not be placed in it.