New Technology(NT)-Asia Limited Radio Wave Clock Beech Wood Frame Clock Digital

Size: 25 cm x 4 cm Material: Beech wall clock Movement: China Precision Radar Movement Manufacturing: Taiwan Warranty: one year Also provides a foot seat that can be placed on the table, which is quite convenient Taiwan code three generations "automatic" intelligent school clock clock About the radio clock Radio clock The radio clock, also known as the radio wave control clock, can automatically receive the radio wave signal of the atomic clock and interpret its signal as time display. 2. Standard radio waves The radio clock can provide accurate time for consumers. It is coded by the National Time Service Center to encode the standard time signal. The low frequency radio time code signal is used to decode the signal by the dedicated integrated chip, and then automatically adjusted by the micro processor inside the movement. The time of the clock. 3. The reception of the radio signal is 1000KM-1500KM Instructions 1. Please remove the fixed needle on the back of the movement and then put the battery Refer to the movement battery inside the "+" ”-” symbol to correctly insert two AA batteries (1.5V AA) 2. Start the pointer running action 2.1 Second hand rotation, stop at 12:00 (second hand automatically resets to zero), then the hour hand, the minute hand starts to rotate, the minute hand also points to 12:00:00 (hours and minutes). If the second hand starts at 54~59 , the second to zero to take a circle to point to the 12:00:00 position. If the hour / minute hand then start at zero at 11:48 ~ 11:59, the hour hand to zero to take a circle to point to the 12:00:00 position . 2.2 At this time, the receiving signal is received. This process takes 3~4 minutes. The received signal is based on the newly received time signal. When the second hand starts the first three seconds of the tracking, the hour and minute hands will automatically catch up with the current time. When the received signal time is normal, the LED "green" indicator will flash when the second hand moves to the 00 second position. 2.3 If the signal is not received for 4 minutes due to the difference of the signal, the hour/minute/needle will update the internal memory, and the time, minute, and second hand will start the first three seconds of the chase, and the machine will go to the morning every day at 02:00. 16:00; 03:16:00; 04:16:00 When the nighttime interference source is small, the movement enters the automatic reception to receive the time signal. Radio clock position description It may be different. Even in the same room, the location of the radio clock is different. The location of the building and the floor where the room is located are different. The receiving signal of the receiving signal will also affect the signal. We recommend placing it on the ground. Window side. Use of the venue This product is a product that receives telecom with TV/radio. Please place it in a place where it is easy to receive radio waves, and try to avoid nearby radio waves. The following environments cannot receive signals correctly: Basement 2. High voltage lines, near TV towers and tram racks 3. TV, refrigerator, air conditioner, air freshener, computer and other household appliances nearby 4. Construction site, near the airport, military bases and places with large traffic volume that are likely to cause radio wave obstacles 5. Vehicles are (eg cars, trams, airplanes, etc.) 6. On or near metal furniture