●Material: 925 sterling silver
●Size:
The pattern is about 1cm wide and the ring has two sizes to choose from
1. Width about 2.0mm, thickness about 0.8mm
2. Width is about 2.5mm, thickness is about 1mm
●Attention! Please be sure to confirm the ring size and the text before placing an order. As the products are produced after payment is made, if you request to change the ring size two days after the order is placed and payment is made, an additional modification fee will be charged, and the text part cannot be changed.
●Ring circumference measurement method & comparison table
When making ring circumferences, the "international circumference size listed in the store table" is mainly used. Please note the required "international circumference size" when placing an order.
Because sizes vary from country to country and from store to store, if you measure your ring circumference at a jewelry store or other institution, we recommend that you use the following methods to compare and improve accuracy.
✽Measurement method
1. Go directly to a jewelry store and ask the staff to help you measure the "international size". Pay attention to the size that is not the US size, Hong Kong size, or Japanese size.
2. Place your ring on the ruler, measure the "inner diameter" of the ring (excluding the thickness of the ring), and then compare it with the "inner diameter" in the table below.
3. Use a non-elastic paper strip or measuring tape to tighten it around the "widest part" of the finger where you want to wear it. The measured length is then compared to the ruler to get the "inner circumference". (Because each person's measurement method is different, this method has a large error.)
4. Use the NI.KOU ring circumference card to measure, the link is as follows
Tips:
If your joints are wider than your fingers, please focus on the joint size.
Try measuring your fingers in the evening, when they are at their largest.
Generally speaking, the finger circumference of the left and right hands of a person is different.
Because fingers expand when heated and contract when cooled, avoid measuring with cold fingers or after they have come into contact with hot water to avoid inaccurate measurements.
●The maximum number of characters you can type for free is 10 (including spaces and symbols)
This model is limited to the inner circle typing
●Font size 1mm, limited to uppercase English fonts "ABC...Z" and numbers "0~9"
The symbols are limited to "." and "&".
●Before placing an order, please be sure to confirm that the ring size and typing content are correct. There is no return or exchange for customized products!
This product is "made to order". Production will not begin until payment is made. It takes an average of 10 production days (excluding holidays and shipping time).
●Since all products are handmade, there will be traces of handwork, such as asymmetry, consistent typing intervals or typing force, etc. It is impossible to be as perfect as a machine. The size and knock marks will be slightly different from the photos, and the inner diameter of the ring will have an error of +/-0.03cm. Please place an order if you can accept it.
Repair
The Silver chain is not repairable. If the jewelry needs to be repaired, please provide pictures and discuss with the designer. The quote will be based on the damage condition. You will need to pay the round-trip shipping fee separately.
●About our handmade accessories
We use 925 sterling silver and pure copper, and each handmade jewelry is
All are completed by traditional metalworking techniques - sawing, hammering, carving, welding, filing, inlaying, polishing, etc.
It retains the handmade texture created by welding and forging.
●Maintenance tips
1. All accessories, no matter what material they are made of, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., which will seriously damage the accessories and cause oxidation, so they should be avoided and kept away from as much as possible.
2. It is recommended to wear the jewelry frequently, as the body's oils can give the jewelry a natural, warm and beautiful luster.
3. Jewelry will oxidize, sulfurize or turn yellow and black over time. You can use a moist soft-bristled toothbrush with toothpaste or tooth powder to gently brush the surface, or use a Silver-wiping cloth or Bronze-wiping cloth to wipe it to restore the original metallic luster.
4. If the jewelry is specially vulcanized, please do not wipe it excessively to avoid the disappearance of the vulcanization design effect.
5. If you are worried that the chemical emulsions used in Silver or Bronze wiping cloths may cause skin allergies, you can rinse them with clean water and wipe them dry before wearing.
6. Natural stones, crystals and pearls can be cleaned with clean water and then wiped with a soft cloth.
7. When not wearing, clean it and store it in a sealed bag to reduce the oxidation rate.
8. Do not put various accessories in the same jewelry box. Accessories with different hardness will rub against each other and cause wear and tear.
9. Never use any other tools to clean your jewelry, which will leave scratches on the surface of the jewelry. If it is necessary to use a brush, please use a clean or very soft brush to brush your jewelry.
Origin/Manufacture method
Origin: Handmade in Taiwan
●Size:
The pattern is about 1cm wide and the ring has two sizes to choose from
1. Width about 2.0mm, thickness about 0.8mm
2. Width is about 2.5mm, thickness is about 1mm
●Attention! Please be sure to confirm the ring size and the text before placing an order. As the products are produced after payment is made, if you request to change the ring size two days after the order is placed and payment is made, an additional modification fee will be charged, and the text part cannot be changed.
●Ring circumference measurement method & comparison table
When making ring circumferences, the "international circumference size listed in the store table" is mainly used. Please note the required "international circumference size" when placing an order.
Because sizes vary from country to country and from store to store, if you measure your ring circumference at a jewelry store or other institution, we recommend that you use the following methods to compare and improve accuracy.
✽Measurement method
1. Go directly to a jewelry store and ask the staff to help you measure the "international size". Pay attention to the size that is not the US size, Hong Kong size, or Japanese size.
2. Place your ring on the ruler, measure the "inner diameter" of the ring (excluding the thickness of the ring), and then compare it with the "inner diameter" in the table below.
3. Use a non-elastic paper strip or measuring tape to tighten it around the "widest part" of the finger where you want to wear it. The measured length is then compared to the ruler to get the "inner circumference". (Because each person's measurement method is different, this method has a large error.)
4. Use the NI.KOU ring circumference card to measure, the link is as follows
Tips:
If your joints are wider than your fingers, please focus on the joint size.
Try measuring your fingers in the evening, when they are at their largest.
Generally speaking, the finger circumference of the left and right hands of a person is different.
Because fingers expand when heated and contract when cooled, avoid measuring with cold fingers or after they have come into contact with hot water to avoid inaccurate measurements.
●The maximum number of characters you can type for free is 10 (including spaces and symbols)
This model is limited to the inner circle typing
●Font size 1mm, limited to uppercase English fonts "ABC...Z" and numbers "0~9"
The symbols are limited to "." and "&".
●Before placing an order, please be sure to confirm that the ring size and typing content are correct. There is no return or exchange for customized products!
This product is "made to order". Production will not begin until payment is made. It takes an average of 10 production days (excluding holidays and shipping time).
●Since all products are handmade, there will be traces of handwork, such as asymmetry, consistent typing intervals or typing force, etc. It is impossible to be as perfect as a machine. The size and knock marks will be slightly different from the photos, and the inner diameter of the ring will have an error of +/-0.03cm. Please place an order if you can accept it.
Repair
The Silver chain is not repairable. If the jewelry needs to be repaired, please provide pictures and discuss with the designer. The quote will be based on the damage condition. You will need to pay the round-trip shipping fee separately.
●About our handmade accessories
We use 925 sterling silver and pure copper, and each handmade jewelry is
All are completed by traditional metalworking techniques - sawing, hammering, carving, welding, filing, inlaying, polishing, etc.
It retains the handmade texture created by welding and forging.
●Maintenance tips
1. All accessories, no matter what material they are made of, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., which will seriously damage the accessories and cause oxidation, so they should be avoided and kept away from as much as possible.
2. It is recommended to wear the jewelry frequently, as the body's oils can give the jewelry a natural, warm and beautiful luster.
3. Jewelry will oxidize, sulfurize or turn yellow and black over time. You can use a moist soft-bristled toothbrush with toothpaste or tooth powder to gently brush the surface, or use a Silver-wiping cloth or Bronze-wiping cloth to wipe it to restore the original metallic luster.
4. If the jewelry is specially vulcanized, please do not wipe it excessively to avoid the disappearance of the vulcanization design effect.
5. If you are worried that the chemical emulsions used in Silver or Bronze wiping cloths may cause skin allergies, you can rinse them with clean water and wipe them dry before wearing.
6. Natural stones, crystals and pearls can be cleaned with clean water and then wiped with a soft cloth.
7. When not wearing, clean it and store it in a sealed bag to reduce the oxidation rate.
8. Do not put various accessories in the same jewelry box. Accessories with different hardness will rub against each other and cause wear and tear.
9. Never use any other tools to clean your jewelry, which will leave scratches on the surface of the jewelry. If it is necessary to use a brush, please use a clean or very soft brush to brush your jewelry.
Origin/Manufacture method
Origin: Handmade in Taiwan