Mingya kiln l wood-fired gray-glazed iron spot plate

The gray glaze flows naturally in the high-temperature wood kiln, The multi-layered texture makes the food container low-key but full of presence. It is a good helper to decorate the table and set the plate. https://live.staticflickr.com/65535/51046350587_ea2c37617a_b.jpg **Wood burning introduction** "Firewood" is a traditional kiln burning method that uses wood to burn to a high temperature of over 1200 degrees. There are natural "fire marks" left by firewood directly on the green body, as well as the ashes that fall naturally after the wood is burned, which makes the color of the work warm and rich in changes, which is a realm that electric kilns and gas kilns cannot reach. Compared with ordinary electric kilns and gas kilns, it takes about 8 to 10 days for firewood to burn from the row (stack) kiln, from ignition to closing the kiln, and then cooling down. Coupled with the high pressure of the wood burning kiln, as well as the humidity of the climate, the dryness of the wood, the artificial speed of throwing wood, the location of the kiln... and other factors, it may lead to the success or failure of the work, and the damage rate is also high. Experienced wood-burning writers will consider the speed of the entire kiln airflow when discharging the kiln. From the different sizes of the works, how to emit, how to estimate how the fire path rises, how to throw wood and carbon, and the degree of burning fire must be planned. mind. Every process must be dedicated and focused, and then the perfect wood-fired works will be presented. https://live.staticflickr.com/65535/50056938642_a49dc61e15_b.jpg Our works range from mixing soil, pulling out, glazing and firing purely handmade Although not as perfect as a boutique But left the creator's most simple creative process and feel Each piece has its own unique appearance, this is the fascinating place of pottery! Made in Taiwan / Hualien https://live.staticflickr.com/65535/49458496546_7f84188ee4_b.jpg **Precautions** 1. The works are all handmade, the texture and color are different, and the computer display is different. 2. The surface of the work has bumps, slight bubbles, glaze shades, and cracks. The texture is normal for hand-made, not flaws. 3. Each piece is stamped with a Mingya kiln seal, or hand-carved and signed by the author (Teacher Cai Rongzong, Teacher Zhong Xuanhui). 4. Please use sponge, soft detergent and water to clean it for the first time. It should not be heated by exposure to a direct fire source, and the temperature difference between hot and cold should not be too large. It can be used in microwave ovens, ovens and electric cookers. 5. The works are all real shots. If you have any questions, please feel free to contact us by email, and we will get back to you as soon as possible!! https://live.staticflickr.com/65535/50056872442_b815a960f1_b.jpg