Driver NEW design ice drip coffee maker-600ml (two colors in total)

https://youtu.be/DERWJq3G3uo https://live.staticflickr.com/65535/52230951383_1b9c21dd0e_b.jpg https://live.staticflickr.com/65535/48801928828_f204f1125d_o.jpg https://live.staticflickr.com/65535/48802276566_a1cb605d66_o.jpg https://live.staticflickr.com/65535/48802417212_352fbd3703_o.jpg https://live.staticflickr.com/65535/48802417277_a6432c63cb_o.jpg https://live.staticflickr.com/65535/48802417272_aa0a9ffb10_o.jpg Product specifications------------------------------------------------ ---------- ． Product Name: Driver NEW Design Ice Drops 600ml ． Model: DR-20321-TR ． Size: Upper pot base - diameter 10cm x height 12.8cm / powder filling tank - diameter 10cm x height 7cm / glass pot - diameter 10cm x height 15.2cm ． Material: Upper pot seat-AS/Powder filling tank-AS, SUS304 stainless steel filter/Glass pot-heat-resistant glass (heat-resistant 120°C) ． Capacity: 600ml ． Weight: about 485.7g ． Origin: Taiwan Precautions------------------------------------------------ ---------- ． Do not place the glass kettle near a fire to prevent it from being deformed by heat. ． Do not collide the glass pot with other hard objects and avoid heavy drops. ． Avoid using rough cleaning brushes such as steel wire to scrub the glass pot vigorously to avoid scratching the glass surface, which may cause damage in subsequent uses. ． If the glass is cracked, please stop using it. ． This product cannot be heated directly. ． This product is a glass product and is a consumable product and is not covered by the warranty. ． When the powder filling tank is not loaded with coffee powder, do not put the water divider into it to avoid jamming. ． If there is a water outage, it is recommended to use normal temperature water ． First turn the regulating valve to the maximum, and then turn it to 1 drop per 2 seconds. ． Except for glass jugs, other items cannot be placed in the dish dryer. ． Due to different settings and brands of computer monitors, there will inevitably be color differences and differences in personal sensory perception. Product shipments are based on actual colors. ． Because the dimensions are measured manually, there may be an error of ±3 cm. ． Due to manufacturing limitations of plastic and metal products, there will be plastic wear, unevenness at the injection point, burrs on the edges, etc. These are all normal phenomena. ． Due to production limitations, the shape of porcelain glass products may vary slightly due to firing or blowing, and may also produce bubble spots, water lines, die-cut marks, black spots, uneven glaze peeling, uneven dents, etc. Some products The bottom is unglazed to prevent slipping. ． Log products will have original woodworm spots and log growth lines. There is a slight difference in the wood grain of the photographed product, which is normal.