【Mike Frederiqo】Trendy Bluetooth portable speaker

【Features】 1. Tsk tsk raised funds exceeding 1300% 2. Battery life reaches 12hr+ 3. 5 monomers, rich music levels 4. Support TWS dual-machine connection to meet the three-dimensional surround sound field 5. High-standard EAI TM tuning technology Product safety mark certification [R3D862] NCC certification number [CCAH21LP6740T7] 【Instructions for use】 [Bluetooth connection pairing] 1. Automatic pairing: Search the Bluetooth name [BIGGER MD2] through the device's Bluetooth, click to pair, and the voice prompt [di~] means the pairing is completed. 2. Manual pairing: If the device cannot find the local Bluetooth device, after turning it on, short touch the TWS button on the control panel above the speaker, and the voice prompts [beep] to enter the pairing state. At this time, you can search for the local Bluetooth name [BIGGER] through the device. MD2] and connect. [Pairing of two MD2 TWS] 1. TWS pairing connection between two speakers ． After turning on the two speakers, press and hold the TWS buttons of the two speakers at the same time. The voice prompts [beep]. When the front indicator light flashes blue, it means that the two speakers are pairing. Please wait for about 8-10 seconds. . ． When the two speakers issue voice prompts "The left channel" and "The right channel" respectively, the two speakers have been successfully connected, forming a 360-degree stereo surround sound field. ． Search for the Bluetooth name [BIGGER MD2] of this product through mobile phones and other devices for pairing. The speaker will issue a voice prompt [di~], which means the Bluetooth pairing of the device and the speaker is successful. ． After completing the above pairing, the two speakers will automatically complete TWS pairing next time they are turned on. 2. Re-pair speakers: When you need to disconnect the current connection between the two speakers and re-pair different speakers. ． Please first unblock the two speakers that have been successfully paired with TWS. Press and hold the TWS button on one of the speakers to disconnect the TWS pairing. ． Touch the TWS button on the top control panel, and the voice prompt [beep] sounds, which means it enters re-pairing mode. ． Please perform the steps of "Two Speakers for TWS Pairing" again. ． Search and pair through the device again. The voice prompt [beep~] sounds and the Bluetooth pairing is successful. 【play music】 1. When the Bluetooth connection is successful and playback is normal, you can touch the top control panel buttons to perform the following operations: ． Touch the play button in the middle to control the play and pause of mobile music (AUX mode is mute). ． Touch the VOL+ key and VOL- key to control the volume of the speaker playback. The indicator light flashes during the adjustment process. When the volume is adjusted to the minimum or maximum, the voice prompt [ding ding] indicator light changes from flashing to steady light. 2. If the sound is intermittent or no sound during playback, please confirm whether the mobile phone is within the normal communication range of the speaker: about 7-10 meters without obstacles. 3. The music fade-in and fade-out functions and playback operation functions of some third-party music player programs are not supported. To avoid abnormalities or "pop" impact sounds during music operations, please try to use the built-in music player on your phone for playback. [External audio source playback (AUX) mode] 1. When the speaker is powered on, use a 3.5mm audio cable to connect the speaker to the playback device. The product will automatically switch to AUX mode. The panel indicator will light up red, and the device's music player can be turned on for playback. 2. In the external audio source playback mode, the VOL+ and VOL- keys can adjust the volume, and the play key can mute the speaker. 3. The music fade-in and fade-out functions and playback operation functions of some third-party music player programs are not supported. To avoid abnormalities or "pop" impact sounds during music operations, please try to use the built-in music player on your phone for playback. [Manual mode switching] 1. If you use Bluetooth and AUX modes at the same time when the speaker is turned on, touch the INPUT key on the top control panel to switch between Bluetooth and AUX modes. 2. Description of the indicator lights when switching modes: blue light - Bluetooth mode, red light - AUX IN mode. 【Precautions】 1. Because this product has a built-in lithium battery, please comply with the following storage regulations: ． Please keep the product away from any moisture and liquid. Do not place it in a humid environment, nor put it into water or expose it to rain to avoid the risk of electric shock. ． Please keep the product away from heat sources and do not put it into fire or place it near open flames or candles to avoid fire. ． Please do not disassemble this product or remove any parts at will. 2. Please keep the product away from dusty places and place it on a stable and level platform. 3. Do not place any heavy objects on top of this product. 4. Please do not disassemble or damage the product or replace parts by yourself. 5. Do not press the touch buttons on the top control panel with excessive force to perform operations. 6. Please protect the power cord properly and do not turn off the power by twisting or pulling the power cord. 7. If this product will not be used for a long time, please unplug the power cord. 8. Make sure that the jack and wire of this product are firmly connected and fixed. Do not use damaged wires for charging. 9. Please use a soft, clean cloth dipped in water to clean the product. Do not use detergent or alcohol to clean it. 10. Noise occurs: Please make sure that there are not too many wireless transmission devices in the environment, such as routers, induction cookers, wireless cameras, wireless mice and keyboards, etc., which may affect the smoothness of signal transmission. 11. Unstable connection: When connecting the product, please keep the space free of obstacles such as multiple partitions, doors, etc. to avoid unstable signal problems.