A mountain of kindness - Entrance living room | Healing salt lamp | Healing energy | The first choice for gifts to the elders

． Product specifications - height: width = 1.5: 1, reference weight: 8Kg ± 0.5Kg (1) This salt lamp uses a smart salt healing starter (HE-26024) (2) Constant temperature control, energy saving and environmental protection, and will not blindly heat. (3) Breaking away from the traditional, non-environmentally friendly structure of using tungsten filament lamp as heat source, the life of the new device can be 30 times longer. (4) Constant temperature control allows the process of moisture absorption and evaporation of salt bodies to produce negative ions to circulate continuously, which is the best state for air purification function. Overheating will repel and absorb water vapor, and undercooling will reduce the excitation force of negative ions. (5) There is no need to turn on the lights 24 hours a day to prevent deliquescence. You can keep the lights warm when going out or sleeping to continuously generate negative ions and prevent deliquescence. https://live.staticflickr.com/65535/53717544623_ac484d912c_c.jpg (Far infrared spectrometer, showing the internal temperature under constant temperature control) (6) Intelligent situational lighting design: Breathing salt, golden warm colors, silvery white cold colors, easy to match seasons and decorative backgrounds. https://live.staticflickr.com/65535/53733114701_31fcee29a4_k.jpg (7) Worldwide patents and international safety certifications. https://live.staticflickr.com/65535/53717673674_7559e500d1_h.jpg https://live.staticflickr.com/65535/53717337396_1fd82d294a_k.jpg ____________________________________________________________________________ Operation instructionsOperation Smart Salt Healing Starter Installation: (1) The infrared remote control receiving thread needs to be placed outside the salt therapy lamp to receive remote control signals. (2) When the power is plugged in for the first time, the warm and cold light modes will appear after power-on. 1. The smart salt therapy starter is installed in the salt body through the base. 2. The smart salt therapy starter is installed between the base and the salt body. 3. The smart salt healing starter is installed in the container. https://live.staticflickr.com/65535/53717672264_132186b519_k.jpg ____________________________________________________________________________ MAINTENANCE AND NOTES MAINTENANCE AND NOTES 1. Use a dry cloth to remove dust on the surface of the salt body every day to maintain its good light transmittance. It can also maintain a certain effect on the conversion operation of the Fei Yiqing salt therapy lamp and the water vapor in the air. 2. If there is soot that cannot be removed with a dry cloth, just use a wet cotton cloth or sponge to remove the dirt on the surface of the Fei Yiqing salt therapy lamp. Try not to soak the salt therapy lamp in water. 3. The Feiyiqing salt therapy lamp can be placed in rooms, bathrooms, humid basements and other environments, but it is necessary to pay attention to whether the smart salt therapy starter is functioning properly to avoid deliquescence caused by the salt body absorbing moisture. 4. In order to avoid moisture condensation on the surface of the salt therapy lamp due to humid weather or accidental spraying, it is recommended to keep the smart salt therapy starter on or in a warm state to avoid this phenomenon. 5. It is recommended to turn on the smart salt therapy starter at ordinary times to achieve the best performance; if the salt therapy lamp is not used for a long time, please wrap it in a plastic bag to prevent moisture. 6. Please avoid collision or falling damage. <Notes> 1. Do not drop or press the remote control heavily. 2. Please do not mix [old and new] / [different brands] / [different materials] batteries to avoid affecting or damaging the battery life and the function of the remote control. 3. If the remote control is not used for a long time, please remove the battery to prevent damage to the remote control caused by battery leakage. 4. This product is suitable for general AA dry batteries (1.5V.AAA carbon zinc batteries). It is not recommended to use alkaline batteries. <Service description> 1. Damage caused by natural disasters or force majeure 2. Failure to follow the instructions for use or improper operation. 3. Disassembly, assembly or repair without the authorization of our company’s technicians