Mingya Kiln l firewood ash glaze original ore coffee cup mug

Simple and simple glaze, In the process of firewood burning, iron markings correspond to falling dust, Presents a layered texture. https://live.staticflickr.com/65535/49458750412_6c4834e042_b.jpg **Firewood Introduction** "Firewood burning" is a traditional kiln burning method. The "fire marks" left by the firewood directly on the green body and the ashes that naturally fall after the firewood burns make the works warm and rich in color, which is a state that electric kiln and gas kiln cannot reach. Compared with ordinary electric kiln and gas kiln, firewood burning from stacking (stacking) kiln, firing and burning to sealing kiln, and then temperature reduction, these processes take about 8 to 10 days. In addition, the pressure of the wood burning kiln is very high, and the factors such as the humidity of the climate, the dryness of the wood, the artificial wood-feeding speed, the location of the kiln, etc., may cause the success or failure of the work, and the damage rate is high. Experienced wood burning writers will consider the speed of the air flow in the kiln when kiln firing. From the different sizes of works, how to estimate the fire path rise, how to put firewood and carbon, and the degree of burning fire, you must plan mind. Every process must be devoted and focused, so that the perfect firewood works can be presented. https://live.staticflickr.com/65535/48889089358_5abbecc11a_b.jpg Made in: Hualien, Taiwan Our works range from broken, glazed to fired Are all handmade Although not as perfect as a boutique It leaves the creator with the most simple creation process and feel Each piece has its own unique appearance, this is the fascinating place of pottery! https://live.staticflickr.com/65535/49458495751_f35b0c0622_b.jpg **Precautions** 1. The works are handmade, the texture and color are different, and the computer display is different. 2. The surface of the work has bumps, trace bubbles, glaze color, and crack texture. It is a normal phenomenon of handwork and is not a defect. 3. Each piece of work is stamped with the Mingyao kiln seal or hand-carved by the author (Mr. Cai Rongzong and Mr. Zhong Xuanhui). 4. Please wash with sponge and soft detergent and water before first use. It should not be exposed to direct fire and heated, and the temperature difference between hot and cold should not be too large. Suitable for use in microwaves, ovens and electric cookers. 5. The works are all shot in real products. If you have any questions, please feel free to contact the station and we will reply you as soon as possible !! https://live.staticflickr.com/853/41783129030_24c11ae178_b.jpg