Simple sealing machine

https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_4105a0cd-8f4b-412f-a0d2-bc57f96b7c66.jpg https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_4da7c52f-11a9-4173-8d7a-92600af5318e.jpg https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_19780504-7f8d-4e4c-8569-d8f590138395.jpg https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_062c2ff2-445d-4e57-af31-4b87f61302d8.jpg https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_aaae4ca4-d6be-4f13-9335-f2f4ad8310dd.jpg https://cdn1.cybassets.com/s/files/19154/ckeditor/pictures/content_6fc91d6f-e879-4e0e-a45d-cd70cdd82f08.jpg Lightweight and convenient, it uses heat to slide the bag mouth to seal tightly, preventing uneaten snacks or food from getting damp. Applicable to packaging bags made of materials such as vapor-deposited aluminum, polypropylene (PP), polyethylene (PE) and polyvinyl chloride (PVC) with a thickness of less than 0.1mm. ※Requires 2 AA batteries (sold separately). ︎Install the battery: ①Open the top cover. ②Open the battery cover, as shown in the figure, confirm the positive and negative poles, and install the battery. ※Rechargeable batteries are prohibited; do not mix old and new batteries. ③Close the battery cover. Directions: • Suitable for packaging bags made of vapor-deposited aluminum, polypropylene (PP), polyethylene (PE) and polyvinyl chloride (PVC) with a thickness of less than 0.1mm. (Please adjust the pressing force and sliding speed according to the material and thickness of the bag) -------------------------------------------------------------------------------- Front of package 1. Push the safety cover outwards and the sealing machine clamps the bag opening and presses it for 3 seconds. ※Please be careful not to get your hands caught 2. Gently press the upper cover to slide, and adjust the pressing force and sliding speed according to the material and thickness of the bag. 3. As shown in the figure, the unsealed parts on the reverse side of the package are sealed in a cross direction. After use, push the safety cap back on. ※When sealing, please refer to the guide line on the sealing machine. Specifications Brand: Japan LEC Main materials: body - plastic (ABS), Stainless Steel plate; heating parts - Teflon cloth, steel wire (nickel electroplating), fluorinated rubber, ceramic, Bronze. Shelf life: 10 years (unopened) Country of Origin: China. ---------------------------------------------------- Please read the precautions carefully before use. ※Do not press the hot parts directly with your fingers to avoid burns. This product is a household sealing machine. Please do not disassemble or modify it by yourself or use it for other purposes. Do not use it for more than 1 minute to avoid high temperature danger; after using it for 1 minute, please wait 5 minutes before using it again. Please keep out of reach of children and put on the safety cover to avoid danger. If there is any crack or deformation, please stop using it. Do not use it on bags filled with liquids; when sealing, do not touch the bag opening immediately to avoid burns. Improper use of batteries may cause heating, rupture or leakage. Make sure the positive and negative poles are installed correctly and check the batteries regularly for leakage. Do not use rechargeable batteries; do not mix old and new batteries; do not charge, disassemble, heat or put into fire without authorization; remove the battery when not in use for a long time. Do not use diluent or gasoline. When it is dirty, be sure to remove the battery before cleaning to avoid burns. Please wipe the main body or heating parts with a damp cloth wrung out in clean water. Products and packaging may be subject to change due to improvements, etc.