【Moken】Top Stainless Steel Multifunctional Vegetable and Fruit Peeling Knife (with 6 Functions)

Function (1) Peeling First open the white knife cover and remove it, then you can start slicing vegetables and fruits. Due to the special design, only a little of the skin will be peeled off. It is very easy and convenient to use, such as from top to bottom or bottom to top, both directions are acceptable. Shavings: You can cut into thin slices with peeling functional vegetables, such as radishes, celery) Shredded: You can use the peeling function vegetables to cut into filaments, such as cabbage, purple cabbage) Function (2) U-Blade & Function (3) V-Blade Hold the peeler horizontally and gently press along the edge? (Cucumbers or fruits and vegetables) The skin is scratched. Use a U-blade – a variety of different patterns can be created quickly and easily. Use a V-blade – cut from top to bottom for fine lines. Function (4) Decorative Cutter There is a black card on the back of the peeler. Press the black card with your thumb and press down to open the decorative knife in the peeler. To use, the white knife cover of the blade must be covered, and the tip of the knife should be inserted into the pulp. inch width and re-insert it in the same place. Repeat these steps until a satisfactory shape is obtained. Peel the fruit (such as pear, kiwi...) in half to show a beautiful crown effect. Function (5) pedicle remover Fully open the decorative blade inside the peeler, remember that when you are not using the peeler, you must put the white blade cover back on the blade, place the stalk remover on the stalk of the fruit, and press down to remove the Turn the stalk remover from left to right until the stalks are removed from the fruits and vegetables. Function (6) Orange peeler You can remove the pedicle from the orange with the sharp corner of the orange peeler, and then draw the orange peeler vertically from top to bottom from the place where the pedicle has been removed, and you can grab five to six equal parts (grab the equal parts by yourself). ), use an orange peeler to draw a tangent, then use a decorative knife, and press the tangent to easily peel off the peel. Product Specifications ‧ Product model: GP1001 ‧ Physical size: 15.3×7.5×2 (cm) ‧ Packing size: 16.8x9.3×3 (cm) ‧ Weight: 126 g (including box) ‧ Material: The main material is stainless steel ‧ Place of Origin: Taiwan