[Handmade by Qu Shuichen] Tanzanite metal wire braided bracelet

Tanzanite bracelet, the main bead is a 9mm tanzanite round bead, the matching Stone are also tanzanite, the wire is made of pure copper wire with distressed treatment, and the extension chain and buckle are made of Bronze. The total length is 17cm + 3cm extension chain, suitable for hands with a circumference of 15-18cm. The position of the actual wearing video is about 15.5cm with a hand circumference of 15.5cm. The effect of buckling in the first grid (the actual wearing video is matched with other styles of bracelets. This product page only contains tanzanite bracelets. ). When I first made this style, I decided to make the bracelet and necklace together, which was actually all the materials I had available. The bracelet is entirely made of woven decorative parts as the main axis, and the design features can be displayed 360 degrees on the wrist. [Instructions for modifying hand circumference] Lengthening: There is currently an extension chain. If it needs to be extended, it will be lengthened appropriately. Basically, it will not affect the main design. Shortening: Removing the three tanzanite bead decorations at the end of one end can shorten it by about 1cm. If you need to shorten it further, you will need to remove a large section of woven decoration and add small beads for adjustment. The design will be slightly changed, but the overall Style doesn't matter. If you need to modify the hand circumference, please remember to note "fitting hand circumference" in the remarks column. ❖Photos of the works are mostly taken in natural light during the day, and the dimensions are length x width (x thickness). ❖Metalwork and silver jewelry works do not come with chains by default. In addition to commercially available Silver, it is also recommended to pair sterling silver vulcanized distressed works with Stainless Steel chains, which are more matching in color. ❖During the metal wire weaving and production process, the wire may be slightly pinched/cut due to the strength of the operating hand, which basically does not affect the wearing effect. ❖The label "Art Bronze" is a special wire for crafts with Bronze+ plating + protective layer. "Red Bronze" and "Bronze wire" are marked as bare Bronze(no electroplating). The Silver wire will be marked as 925 or 999 Silver. ❖Natural stones may be born with characteristics such as clouds, lines, ore defects. There may also be small flaws in drilling and polishing. ❖Shipment is preset for simple packaging, with clean anti-collision packaging materials and shipping bags, and sealed bags for easy storage. [Artistic Bronze braided jewelry] ❖ Artistic Bronze is a special craft wire made of pure copper wire + electroplating layer + protective layer. Under normal use and maintenance, the color can be maintained for several years without much change. ❖ Because there is electroplating and protective layer on the surface, please do not use Silver wiping cloth or toothpaste for cleaning, as this will cause the plating to wear out quickly. ❖ After wearing it, please wipe away any moisture (especially sweat) with a soft cloth and store it in the attached sealed bag. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or in hot springs. In addition to accelerating the wear of the wire, it may also damage the natural stone. [Electroless Bronze/ Silver wire braided jewelry/metalworking sterling silver jewelry] ❖ Red Bronze and Bronze wire. Silver wires are all electroless-plated wires and naturally oxidize as a normal phenomenon (they will gradually turn into bronze/silver). The color and oxidation rate will be slightly different depending on the wear and personal physique, which is also one of the characteristics of bare Bronze jewelry. In terms of oxidation speed, red Bronze feels faster (it may turn into antique red Bronze in a few days to weeks), while Bronze and Silver are slower. ❖ The tone of the wire after vulcanization (distressing) treatment will be more stable than that of the untreated wire, but the polished parts will also gradually oxidize naturally. ❖ If you want to clean the oxidized part, you can generally use a Silver wiping cloth to wipe it, or use toothpaste to gently scrub it and then dry it or blow it dry with cold air from a hair dryer. ❖ After daily wear, you can use a soft cloth to dry the moisture and store it in the enclosed sealed bag. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or in hot springs. In addition to accelerating the oxidation of the wire, it may also damage the natural stone. ❖ All works without electroplated wire can be sent back for re-polishing (you only need to pay the return shipping fee) 【Natural stone】 ❖ Natural ores may have clouds, lines, mineral defects, and black spots, and there may also be small flaws in drilling and polishing during processing. ❖ Most of the natural stones used in the works are semi- Gemstone. Some types of minerals may have low hardness (will be specially noted). Please try to avoid letting Silver wiping cloths, toothpaste and other abrasive and polishing items come into contact with the natural stones when maintaining the metal parts of the jewelry. part. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or when soaking in hot springs. It may damage the natural stone.