Mingya Kiln l Wood-fired Grey Glazed Iron Spot Wide Mouth Coffee Cup

Simple and simple glaze, In the process of burning wood, the iron markings correspond to the falling ash, Full of layers of texture. Add more elegance. https://live.staticflickr.com/65535/50056938642_a49dc61e15_b.jpg **Wood burning introduction** "Firewood" is a traditional kiln method that uses wood to burn to a high temperature of over 1200 degrees. There are natural "fire marks" left by firewood directly on the green body, and the ashes that naturally fall after the wood is burned, which makes the color of the work warm and varied, which is a realm that electric kilns and gas kilns cannot reach. Compared with ordinary electric kilns and gas kilns, it takes about 8 to 10 days for wood burning from the stacking (stacking) kiln, ignition and burning to closing the kiln, and then cooling down. Coupled with the high pressure of the wood burning kiln, as well as the humidity of the climate, the dryness of the wood, the artificial speed of throwing wood, the location of the kiln... etc., all of these factors may lead to the success or failure of the work, and the damage rate is also high. Experienced wood-burning writers will consider the speed of the entire kiln airflow when discharging the kiln. From how different sizes of works are emitted, how to estimate how the fire path rises, how to throw firewood and carbon, and the degree of burning fire must be planned. mind. Every process must be dedicated and focused to have a perfect firewood work presented. https://live.staticflickr.com/65535/49458750412_6c4834e042_b.jpg Place of manufacture: Hualien, Taiwan Our works range from breaking, glazing to firing All handmade Although not as perfect as a boutique But left the creator's most simple creative process and feel Each piece has its own unique appearance, this is the fascinating place of pottery! **Precautions** 1. The works are all handmade, the texture and color are different, and the computer display is different. 2. The surface of the work has bumps, slight bubbles, glaze shades, and cracks. The texture is normal for handwork, not flaws. 3. Each piece is stamped with a Mingya kiln seal or hand-carved and signed by the author (Teacher Cai Rongzong, Teacher Zhong Xuanhui). 4. Please clean with sponge, soft detergent and water before first use. Do not expose to direct fire to heat, and the temperature difference between hot and cold should not be too large. It can be used in microwave ovens, ovens and electric cookers. 5. The works are all real shots. If you have any questions, please feel free to contact us, we will reply you as soon as possible!! https://live.staticflickr.com/853/41783129030_24c11ae178_b.jpg