[Ruoyi] Natural lobular rosewood double ring bracelet

[Ruoyi] Natural lobular red sandalwood double-circle bracelet Hetian jade ebony hollowed out Fulu natural jadeite blue water separator **Ruoyi** Think far away Red dust smoke and rain deep Dreaming of a tree, the fragrance of the trees is still fresh Let the past karma go with the wind Butterfly Dance Village Heart like Bodhi All kinds of wishful pure land **Related products** This product has been carefully selected, and the natural lobular rosewood 6mm garden beads are carefully selected to make double circle bracelets. The lobular rosewood is a pure natural material, no coloring and no optimization. With natural jade blue water separator beads, natural Hetian jade old beads, natural black sandalwood Fulu (gourd) hollow carvings, hanging natural Hetian jade Fulu (gourd) carvings. The gourd has been a symbol of good and auspiciousness since ancient times. Ebony hollow Fulu pieces and Tianyu Fulu carving pieces are both unique and unique in shape. Small-leaf red sandalwood: The small-leaf red sandalwood grows slowly. It takes five years and eight hundred years to become a material. It also has the function of exorcising evil and relieving misfortune. Therefore, it has been used by the royal family since ancient times and for Buddhist spiritual practice. Playing, can emit a substance called "wood oxygen", which can qualitatively recuperate, and it is of great benefit to the function of human lungs. **Standard sizes** Natural lobular rosewood beads: 6mm Natural Hetian Jade Fulu (Gourd) Carving Piece: 16.5mm×12m×2mm Natural Ebony Fulu (Gourd) Hollow Carving Piece: 17mm×10mm×5mm Other accessories: natural jade blue water spacer beads and old jade beads **Purchase Notes** This product has been carefully selected. All main and auxiliary materials are selected from natural, no miscellaneous, no coloring, no glue injection. If there are materials that need to be reprocessed due to product matching, we will make special instructions. Some lobular red sandalwood will be bright and reddish in color, and some will be black and purple, black and red, this is a natural phenomenon. This is due to the oxidation reaction of the pterostilbene contained in the lobular red sandalwood with the air, which is more obvious in the sun. The richer the pterosin, the more the color will change to black and purple. However, the color of the product is still good, the brightness and softness are good, and the texture of the product itself will not change. This is an excellent performance of the product material. This product is all made by hand, so there may be traces of handwork in the braided part. We will try to avoid the parts that can be avoided, and some will have small traces for safety and durability. We will try our best to handle it out of sight or hide it. The products in this store are all taken in kind, and one object is one picture. Using professional photography equipment, under natural sunlight, professional photography can restore the true nature of the product as much as possible, but due to the difference of the viewer's monitor and environment. Maybe a little bit biased. If you have any questions, you can also consult customer service to take pictures of the product from multiple angles. **Care of rosewood** 1. After purchasing the lobular red sandalwood bracelet, you should play the bracelet correctly, otherwise it will easily lose its original value. 2. When we wear and maintain it every day, don't Wax and oil, because the lobular rosewood itself is oily, and only the oil it produces is enough. 3. The lobular red sandalwood is afraid of water, so you need to remove the string when washing your hands and bathing. In addition, red sandalwood bracelets should avoid places with a lot of dust and dirt, so as not to be polluted and destroy the original taste of red sandalwood. 4. The lobular rosewood is easily soluble in alcohol, so it should be kept away from alcohol substances or some corrosive chemical liquids, such as gasoline, disinfectants, etc., otherwise it is easy to damage the lobular rosewood. 5. Although lobular red sandalwood is hard, it should avoid collision with hard accessories, because it is wood after all, so everyone should pay attention to as little contact with hard sharps as possible when wearing to avoid scratches. Avoid contact with high temperature, especially fire. 6. If it is dirty, rinse it with clean water and wipe it dry, or wipe it with a soft clean cloth. Try not to use any cleaning products such as detergent, because the acid-alkaline detergent may corrode the lobular rosewood Wooden bracelet. 7. Usually, when we are not wearing the lobular red sandalwood Buddha bead bracelet, we should pay attention to sealing the Buddha beads and put them in a cool and ventilated place to avoid sunlight exposure, which will cause the water loss of the Buddha beads and easily lead to the surface cracking of the Buddha beads. Can be packed in a cotton cloth or airtight bag. If you want to play the lobular rosewood professionally, you can use the following method. The lobular rosewood hand string method is to first rub the hand string with a soft towel for half an hour every day, about a week, to remove the culture on the surface of the rosary. and dirty stuff. Then put the string in a cool and ventilated place, it must be cool and ventilated, otherwise the sun, temperature and excessive drying will cause irreversible damage to the beads. Let it oxidize naturally for as long as possible. After long-term oxidation, put on cotton gloves to start the plate, and then leave it for a week. Repeat the last two steps until the luster on the surface of the beads becomes aura. The specific disk play method steps after oxidation are as follows 1. Rub with a towel after long-term oxidation. The function is to clean the wax layer and dirty color on the surface of the beads and re-polish for 3 days. 2. Rub with a soft cotton cloth for a week, that is, careful polishing. At this time, there will be red marks on the surface of the soft cloth, which is a normal phenomenon, and the color will fade after a week. 3. Place it naturally for a week. Let the beads dry naturally. At the same time, the surface is evenly contacted with air to form a fine and uniform oxide protective layer. 4. At this time, the dry and slightly sweaty hands can start the hand tray. At this time, the hands must have just been washed and dried. Please don't dish directly with sweaty hands, it is best to wear abrasive cloth gloves. Note that the beads around the mouth should also be placed. It can be placed for about 30 minutes a day. After a week to two weeks, you can feel the sticky feeling of hanging when you dry the beads, then the beads are already A thin layer of pulp is formed. 5. At this time, it can be placed for a period of time and then dried naturally. It also allows the pulp to harden to a certain extent. Generally, it is about a week. 6. After about 3 months, you will see that your beads are very shiny. Some well-coated beads sometimes show strong reflections, some like glass luster. It is also commonly known as glass bottom .