Geometric Series – Faceted Hollow Geometric Ring

【Design Concept】 Starting from the angular faceted rings of the past, the geometric lines and grids of the faceted rings are extracted and a modern structure is reconstructed. 【Material and manufacturing method】 The ring body is made of 925 international standard Silver, 3D printed and molded by the designer, and hand-finished. It is a limited edition designed silver jewelry, sulfurized and dyed black, and has a semi-bright surface. The ring body material can be customized, such as 10k, 14k, 18k white gold, yellow gold, the price is calculated separately, and we will open a separate sales outlet for you. 【size】 The widest part of the ring is about 7~7.5mm. It can be slightly adjusted according to different ring sizes to give you the best wearing effect. This ring is made of hollow lines and is not easy to adjust the ring size. Therefore, please confirm your ring size with the designer (according to the international ring size) before placing an order. 【Ring circumference measurement】 Method 1: Take out an old ring and measure the inner diameter of the ring. For example: 16.5mm Method 2: Go to a jewelry store to measure the "international circumference", or go to a silver jewelry store to try on the ring to find out Then tell the designer what the international size is. Method 3: Come directly to the studio to measure the ring size (this is of course the most accurate). Method 4: Provide a convenient address or convenience store for delivery, and I will send you a volume ▼Special attention: There is often a huge error when using paper and thread to measure the ring circumference. It is recommended that you measure the ring circumference clearly to achieve the best effect when wearing it. If the ring size is not suitable due to measurement error, you can send it back to the designer and we will charge some processing fees to modify it for you, so please be sure to confirm the ring size! 【Product packaging】 Textured packaging box, Silver cleaning cloth 【Silver jewelry maintenance】 1. Wearing it regularly is the best way to maintain it. The oil in your body can make the surface of silver jewelry produce a natural luster and also make the Silver The accessories are not easy to turn black. 2. If you don’t wear it for a long time, you can wipe it with a Silver cleaning cloth and seal it in the thick ziplock bag provided to prevent it from getting in the air. The sulfides in the gas react. 3. Avoid soaking in hot springs and contact with chemicals to prevent sulfide and blackening. 4. For routine cleaning and maintenance, you can use a soft-bristled toothbrush dipped in dishwashing liquid to gently scrub, then rinse with clean water and wipe dry. 5. If the surface is exposed to air for a long time and becomes black due to sulfurization, you can use a soft-bristled toothbrush with toothpaste or a napkin to clean it. Dip it in toothpaste and push it with your hands, then wash it with clean water and wipe it dry, and finally wipe it with a Silver cleaning cloth. 6. For severely blackened silver jewelry, first use dishwashing liquid + hot water to clean the grease, then prepare a small pot, add water and salt ( 5 parts water + 1 part salt), boil until boiling, then put in aluminum foil, then put in the blackened silver ornaments and boil for a few minutes, the Silver sulfide on the surface It will be reduced to pure silver, and after it turns white, take it out, wash and wipe it. (Not applicable to silver jewelry with anti-oxidation coating) 7. Soak in Silver cleaning water for 10 seconds, remove and clean, or wipe with a soft cloth dipped in Silver milk. (Not applicable to those with anti-oxidation coating Silver jewelry)