Maintaining salt bricks I Large salt ironing I Himalayan natural rock salt I Hot compress cycle (limited to home delivery)

**【Specifications】** Salt mine origin: Pakistan Himalayan mining area Total weight: approx. 1.75 kg Dimensions: approx. 24 x 14 x 5 cm **Patent size: M586122** ＊Sold randomly, pictures are for reference only **Accessory specifications—** Bulb: 15W E12 lamp holder Wire: Trim switch wire https://live.staticflickr.com/65535/53373307102_b93bf6f69c_b.jpg **Large salt iron｜Patented design Product size: M586122** The main body is made of rosewood and is suitable for use on a flat surface, such as the forearm of the hand, abdomen, leg or sole of the foot. It can also be used with various cushion sets to apply heat to the head, back and lower body, allowing you to apply heat to specific areas for a long time without any effort. The clear color of the wood matches the pink-orange luster of the rose salt, which looks warm and cozy. The small salt brick emits a soft luster, making it a beautiful salt lamp when you leave it alone when not in use. **Usage** After turning on the power, it is recommended to fine-tune the knob first. After it is heated, be sure to touch it with your hands to see if the temperature is suitable to avoid overheating and burns during use. If the salt iron is overheated, please lower the temperature of the fine-tuning wire and let the salt iron cool down slowly, and then start using it again when the temperature is suitable. Since the temperature of salt changes slowly, it will be affected by the temperature of the environment in which it is used, and everyone's body temperature is different.**Once again, please be sure to touch it with your hands before use and adjust it to a suitable temperature before use.** **※Caution※ Please do not keep the temperature high for a long time. If you do not use it temporarily, there are two methods for your reference:** Adjust the temperature to low, let the large salt iron maintain a little temperature to avoid deliquescence, and you can also enjoy the lighting (use a 10w bulb 24 hours a day every month, the electricity bill will not exceed 30 yuan) Cling film sealing - You can turn off the power of the large salt iron, wrap it in cling film after cooling, or put it in a sealed zipper bag and close it tightly to prevent the salt from combining with moisture in the air and causing deliquescence, which may even cause the lamp unit to break. **When using, be careful to avoid pulling or knotting the wire. Over time, the Bronze at the end of the wire may peel off, causing the bulb to not light up and reducing safety.** **What should I do if "the light stops working" after using it for a period of time?** Unscrew the screw and remove the short side wooden strip, take out the cord set and check whether the bulb turns black or the tungsten filament is broken. If so, replace the tungsten filament bulb. (The use time of the light bulb varies, which may be affected by the local current stability or the frequency of tungsten filament shaking. There are many reasons. It is a consumable product) If there is no above phenomenon, please check whether the bulb is loose (please tighten it), whether the fuse in the plug part is damaged and turned black (please replace it), and whether the fuse pops up causing poor contact (please reinstall it). https://live.staticflickr.com/65535/53374539364_a026905cc1_b.jpg **Precautions** Each type of salt ironed salt brick is a unique natural ore, and the shape, color, size, and texture will not be exactly the same as the picture. The product pictures are for reference only. If you want to choose in person, please go to each store to purchase. Textures, ice patterns, mineral defects and sediments on the appearance of salt bricks are all normal phenomena and are not product defects. Due to the hot and humid climate in Taiwan, it is recommended to light the lamp 24 hours a day to avoid deliquescence of the salt lamp. The wires used in the product have passed the inspection by the Taiwan Commodity Inspection Bureau, and the quality is guaranteed. Please use it with confidence. Because the tungsten filament bulb is used, the heating effect is good. When replacing the bulb, please confirm the surface temperature of the bulb first, or wrap it with a towel to insulate it before replacing it. Please be sure to place this product on a flat ground and do not pull the wires hard to avoid poor contact. Salt bricks are made of natural material and will cause wear and tear after being used for a long time. If cracks or thinning occur, please evaluate whether to continue using them. If you need to replace them, please contact our customer service or store personnel to maintain safety in use.