iPhone14/13 French simple firewood gray handmade leather phone case

FRENCH. MARCH French new products in March French simple firewood gray handmade leather phone casefrench gray leather phonecase https://live.staticflickr.com/65535/52732043986_7cc846bbaf_b.jpg https://live.staticflickr.com/65535/52731436807_12a06e2165_b.jpg https://live.staticflickr.com/65535/52732429520_2877bb369e_b.jpg https://live.staticflickr.com/65535/52731435842_c9df53239a_b.jpg https://live.staticflickr.com/65535/52732445028_e176a95320_b.jpg https://live.staticflickr.com/65535/52731962736_c672ab9510_b.jpg ------* Intimate reminder for the lens. notice.------ This lens is designed with a large hole for mounting lens stickers. -------------------------------------------------- The working days of mobile phone cases are 7-14 days, excluding holidays. If the goods arrive early, they will be sent out early. Working days start from 1 day after receiving the order The quantity in stock is for reference only due to the large number of models. (If you have any need for going abroad/urgent needs/gifts, please ask for the stock list first!) Please note that the product design is not a high-function anti-fall or shock-resistant case. It’s a leather shell + hot stamping design! If you need high-protection, high-fall-proof and high-performance products, Please carefully check whether it suits your needs before placing an order! https://live.staticflickr.com/65535/52731543527_dd7ff58029_b.jpg * Please note when placing an order. It is recommended to use general commercially available full version or non-full version stickers for this protective sticker. If it is an imos version protector, Rhino Shield protector, Zhuangzhuang protector, 5d or 6d above, the fuller version of the protector Because the phone case itself has many edges, it is possible that the protective sticker will be touched! Please pay more attention! https://live.staticflickr.com/65535/52732445263_8fe089a460_b.jpg https://c2.staticflickr.com/2/1971/43358116680_7d570b56ff_b.jpg https://live.staticflickr.com/65535/52732445223_4780f567e3_b.jpg https://c2.staticflickr.com/2/1808/28340135987_62876d0907_b.jpg https://live.staticflickr.com/65535/52732464835_1fb8e18799_b.jpg https://c1.staticflickr.com/5/4902/45440764385_eea7898633_b.jpg https://live.staticflickr.com/65535/52732210899_04273bef6b_b.jpg *Synthetic leather shell small reminder leather point. a. Do not get close to water, fire, easily dyeable fabrics, etc. b. The mobile phone case cannot be wiped with alcohol. c. Leather products are not suitable for repeated disassembly and assembly, which may cause damage to the leather surface. Because the leather shell is not as elastic as ordinary TPU soft shells! d. The shell is covered in a square shape and will be relatively tight at first. When loading, please load it parallel to the upper two points and then press the left and right corners of the lower part. e. After installation, please confirm that all four corners are actually pressed into the shell to complete the installation. * Synthetic leather case cleaning instructions leather care. If there is dirt on the leather surface, please use a cotton cloth with a little water. It is not advisable to use large amounts of water for washing. Do not use any detergents, solvents, brighteners, or Wax containing chemical ingredients. The above products will harden and fade the leather surface and quickly shorten the life of the leather. Keep leather out of direct sunlight. Because the leather shell is handmade, please press from both sides below when disassembling and assembling, as shown in the attached picture. Please do not disassemble or assemble from the upper lens, otherwise the phone case will be damaged. https://live.staticflickr.com/65535/52732485423_2857c8cf7c_b.jpg Design Notes: The phone case material is gray cocoa matte synthetic leather soft case The weight of the mobile phone case is measured as 30g for iPhone12 The fit is square and covered in synthetic leather. The use of mobile phone wrap is not recommended! You no longer have to worry about dropping your phone while holding it, adding to your beautiful look. The thickness of the mobile phone case is 0.1~0.15cm. The thickness of this model is 0.15cm, and it is about 0.05cm higher than the screen after the case is installed (bare metal) If you have extremely high requirements for thickness and front height Please consider and confirm before placing an order or contact us. Generally, the mobile phone cases on the market are made in bare metal size. So if too much is added to the phone itself, it will become thicker and cause changes in size. It’s hard to choose a phone case you like! *Please note that items purchased overseas cannot be returned or exchanged due to expensive postage. * overseas's order have no return. ▲Mobile phone cases are products for personal use and can basically protect your mobile phone. "There is no guarantee that your phone will not be damaged if you drop it." If so, please use it carefully in your daily life! https://live.staticflickr.com/65535/52731962636_3ff6539082_b.jpg *Please note when placing an order! The color difference of web pages is due to screen display and setting issues of everyone’s electronic devices. Colors may vary, but we have tried our best to adjust. If you are worried, you can ask us before placing an order. Please confirm before placing an order. Returns or exchanges due to color differences will not be accepted. Actual mobile phone installed model: iPhone13 Promax gold Origin/manufacturing method made in Taiwan / Made in Taiwan