Xiang natural fragrance Fragrance Bronze mold

The tools that need to be prepared for incense seal are: incense seal mold, incense ash, incense burner, incense spoon, incense shovel, ash press, and ash sweep. The steps for making incense seals are as follows: **Loose ash**: Stir the ash in a clockwise direction with an incense shovel, the purpose is to leave air, so that the scent powder is fully burned. **Pressing the ash**: Use the ash press to slowly smooth out the incense ash clockwise, and slowly turn the incense burner counterclockwise, finally showing a flat and smooth gray surface. **Sweeping the ash**: Clean the incense ash on the furnace wall to show respect to the guests. **Buxiang**: Place the incense seal mold in the middle of the incense burner, and use the incense spoon to take the incense powder and fill it into the incense seal mold. **Scraping surface**: Scrape evenly with the incense spatula against the surface of the incense seal mold, so that the incense powder is evenly embedded in the groove, and the incense powder is as solid as possible without leaving any gaps. **Demoulding**: This is the most difficult part of the whole step. Hold the edge of the incense seal with one hand, and pull the incense seal vertically with the other hand to separate the mold and the incense powder, presenting the perfect incense seal pattern. **Ignite**: Use a special incense lighter to ignite, or use a small incense stick to ignite it.