Taiwan's SwaggyGOAT surfboard skateboard spring road rush board professional beginner practice without pedaling the street for children

https://live.staticflickr.com/65535/53201157489_120a309d03_h.jpg https://live.staticflickr.com/65535/53201342276_e6d3c63c2d_h.jpg https://live.staticflickr.com/65535/53201678140_92baa339b9_h.jpg https://live.staticflickr.com/65535/53201342136_204b2b5df6_h.jpg https://live.staticflickr.com/65535/53201341971_e69e93479e_h.jpg https://live.staticflickr.com/65535/53201157094_a012c9b879_h.jpg https://live.staticflickr.com/65535/53201677705_7e95809f44_h.jpg https://live.staticflickr.com/65535/53201341746_f431879f93_h.jpg common problem: 1. Why do surfboards squeak? Answer: When the new board is in use, it is normal for the friction between the PU and the bridge to produce squeaking sounds. Appropriate application of professional grease at the joint between the PU and the bracket can reduce the squeaking sounds. 2. Why didn’t the four wheels touch the ground at the same time? Answer: The tightness of the front and rear brackets of the new board may be different, and it needs to be adjusted according to personal adaptation. This problem can be solved by standing with your feet on the surfboard and your shoulders parallel to the surfboard, and stepping on the board front and back. While pressing, if you feel that the board is too flexible, you can tighten the nuts on the bracket bridge. 3. Why is the wheel idling time so short? Answer: First check whether the nut on the outside of the wheel is tightened too much, causing the bearing to be stuck and unable to rotate smoothly. New skateboard bearings need a few days of running-in period to achieve better results. 4. The board stand was scratched and the paint peeled off after just one play? Answer: Surf skateboards are consumables. Whether you are gliding or doing some tricks, sliding will cause friction with the ground or props. Therefore, as long as you play surf skateboards, these wear and tear are unavoidable, but they will not affect normal use. About surfboarding: 1. Bumps and bumps are inevitable when playing with boards. Wear and tear is normal and not a quality problem. Because the surfboard is assembled manually, there may be slight friction and paint peeling during the assembly process, which is normal, please forgive me. 2. After receiving the goods, please do not use it if you are not satisfied. It will not be returned or exchanged if it affects secondary sales. Please be familiar with it. 3. After receiving the surfboard, if you have any questions, please contact customer service in time to communicate and solve the problem for you. Please do not return it privately to apply for a return. Shopping Notes: 1. When the surf skateboard is wading in water, it will cause the screws to rust and the board surface to deform. This is caused by the special properties of the product. It is a normal phenomenon and not a quality problem. If you mind, please be careful. 2. For daily maintenance of surfboards, please do not touch water or store them in humid places to prevent the board surface from losing elasticity and the bearings from rusting. 3. Surf skateboards are consumables. Whether they are gliding or moving, they will cause friction and collision with the ground. The resulting loss is inevitable and is normal. 4. There will be some sound when pedaling front and rear. This is the sound caused by the friction of the front axle bracket against the axle. It is a normal phenomenon. Adding a little lubricating oil or Wax block to the PU and bracket can reduce the sound. 5. Before taxiing, check whether the four wheels rotate at the same speed. If any wheel rotates slowly or stops suddenly, you can use a T-shaped tool to turn the screws on the wheels counterclockwise to make it smooth. About color difference and size error: 1. Due to different light and display configurations, and personal understanding of colors, color differences are unavoidable. The actual product shall prevail. 2. Size error: The product size is the official size of the brand. Due to different measurement methods and measuring tools of each person, there will be a slight difference from the marked size. Please refer to the actual product. Return and exchange service: 1. Return and Exchange Instructions Please contact customer service before returning or exchanging goods, and take photos of the goods, packaging, accessories, instructions, etc., which are brand new and confirm with the customer that they are correct before proceeding with the return or exchange process. If the product, packaging, accessories and other instructions are missing or damaged, which affects secondary sales, returns or exchanges cannot be processed. 2. Returns or exchanges cannot be processed under the following circumstances: (1) Goods cannot be returned if they are stepped on, bumped, scratched, damaged in appearance, or have been used, modified, or have the tag cut off. (2) Returns and exchanges require that the original packaging (carton, inflatable foam, filler) be carefully packaged and sent back. Returns or exchanges cannot be processed if the goods are damaged during logistics due to packaging. (3) If the outer packaging of the product is damaged or the packaging is wrapped with tape, which affects secondary sales, the product will not be returned or exchanged.