EE169_Preface/ Masking Tape

◎ Purchase notice ◎ The picture will be different depending on the light source, color temperature or screen setting. The actual color is subject to the actual product. If it is unacceptable, please do not order. Due to PET masking tapes are print on smooth surface , it is common that the ink peel off a little bit from the masking tape. We are sorry for any inconvenience this may caused you. Since the continuous loop diagram needs to be connected to the end, physical peeling and falling off will inevitably occur during use. Please pay more attention when using it. Spot Varnish will produce irreversible physical changes (displacement, expansion, spillage, shrinkage) are normal phenomena. Displacement within 5mm are within the normal capacity range. Spot Varnish for the ambient temperature and humidity requirements are high, in reaching a specific index there will be the risk of Spot Varnish peeling. The storage time can not be too long, or it will produce hardening ink peeling, and oxidation after the white atomization. As the Spot Varnish is printed on the smooth surface of PET and printing ink on top, please try to avoid repeated sticking and use scraper to assist in scraping out the air, otherwise there will be irreversible physical phenomenon causing ink peeling. ★If you cannot accept the above purchase instructions, please do not order.