Santorini Windmill Hot Iron Patch - Embroidered Sleeve Badge with Adhesive Backing

1. Product Name: Landmark Series Embroidered Patch (with adhesive backing) 2. Embroidery Material: Thread: Rayon embroidery thread Fabric: Polyester fiber Self-adhesive backing 3. Dimensions: 7.5 x 6 CM 4. Origin: Taiwan 5. Features: Each patch comes with an adhesive backing and can be applied in three ways: direct adhesion, ironing, or sewing. Affix them to clothing, jackets, hats, bags, and more, according to your personal style. Choose from a variety of unique embroidered designs! ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Application Steps: A. Quick Adhesion (No Iron Needed): 1. Peel off the protective backing from the adhesive. 2. Place the embroidered patch onto your desired location. 3. Press firmly for 5-10 seconds. B. Iron-On Application (Iron Required): 1. Peel off the protective backing from the adhesive. 2. Place the embroidered patch onto your desired location. 3. Cover the patch with a thin cotton cloth. 4. Set your iron to the "cotton/linen" setting, approximately 150°C (300°F). 5. During ironing, avoid getting the patch or fabric wet, as this may affect adhesion. 6. Iron with moderate pressure for 20-30 seconds, then allow to cool. ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Important Notes: 1. The adhesive backing may not adhere well to all fabric types. 2. Repeatedly peeling and re-sticking the patch may weaken its adhesive properties. For a more permanent attachment, ironing is recommended. 3. For materials not suitable for ironing (e.g., leather), sewing is advised to prevent damage to your item. 4. When ironing, ensure the fabric is dry; do not use steam or water. 5. Generally, ironed-on patches will not easily peel off. If detachment occurs after some time, it may be due to insufficient ironing time or temperature. Please repeat the ironing process.