Ceramic 3D printing | Double cup , Drinking tea elegantly is no longer hot!

Ceramic 3D printing | Double cup ** Eight choices : violet, lake green, nut yellow, cherry blossom powder, gem crystal blue, bronze sprinkle gold, peacock silk crystal blue, spray blue ** https://www.youtube.com/watch?v=CSN3-1kZLvE ** Production process:** __Step 1: 3D ceramic printing__ First draw a 3D model, convert the model to file calculations, and finally adjust the soil and print related parameters to start making a double-layer cup. __Step 2: Unbaked at 830℃__ Confirm that the adobe is not damaged during the drying and shrinking process, then burn it to 830°C and take it out (in a state that absorbs water like a brick). __Step 3: Wipe the dust__ In order to ensure stable quality and complete glaze, wiping off surface dust is a seemingly simple matter, but it is an indispensable process. __Step 4: Glazing__ Spray the prepared glaze evenly on the biscuit which will absorb water by hand. __Step 5: Glaze firing at 1230℃__ Finally, it is "sintered" at a high temperature of 1230°C, and it becomes the light and brittle porcelain in daily life. ** Precautions before purchase: ** 1. Please avoid heavy drop when using ceramics to extend the service life. 2. Pottery products, if there are black spots on the surface, it is a natural phenomenon that the soil contains iron and other minerals after high-temperature firing, so there is no doubt about the safety of use. 3. The production process must be combined with manual, non-mechanized consistent mass production, natural hand-made traces will cause glaze, drawing and other phenomena. The surface appearance and color of each work will be slightly different, and it is a unique work. 4. As each monitor presents different colors, the actual color is subject to the actual product. 5. When scrubbing, try to use softer utensils to avoid scratches on the surface of the glaze.