Taiwan SwaggyGOAT surf skateboard cloud glare wheel brush street wheel skateboard wheel big fish board high elastic wheel

https://live.staticflickr.com/65535/52979077023_e0b209d5a8_h.jpg https://live.staticflickr.com/65535/52978626146_9cd89d4744_h.jpg https://live.staticflickr.com/65535/52978995940_5e6d565e26_h.jpg common problem: 1. Why do surfboards squeak? Answer: When the new board is in use, it is normal that the friction between the PU and the bridge will cause squeaks. Apply some professional grease to the junction of the PU and the bracket to reduce the squeaks. 2. Why didn't the four wheels touch the ground at the same time? Answer: The tightness of the front and rear brackets of the new board may be different, and it needs to be adjusted according to personal adaptation. Stand on the skateboard with your feet parallel to the skateboard, step on the skateboard front and rear, and you can solve this problem. At the same time, if you feel that the board is too flexible, you can tighten the nuts on the bracket bridge a little. 3. Why is the wheel idling time so short? Answer: First check whether the nuts on the outside of the wheel are too tight, causing the bearings to be stuck and unable to rotate smoothly. For the first time, a new skateboard bearing needs a few days of running-in period to achieve better results. 4. After playing with the board support once, the paint is scratched and peeled off? Answer: Lu Chong board is a consumable product. Whether it is sliding or doing some tricks, sliding will rub against the ground or props, so as long as you play with Lu Chong board, these wear and tear are unavoidable, but it will not affect normal use. of. About Surfboard: 1. Bumps and bumps are inevitable when playing boards. Wear and tear is normal and not a quality problem. Because surfing skateboards are assembled manually, there may be slight friction and paint peeling off during the assembly process, which is normal, please forgive me. 2. After receiving the goods, please do not use if you are not satisfied, as it will affect the secondary sales and will not be returned or exchanged, please be familiar with it. 3. If you have any questions after receiving the surfing skateboard, please contact the customer service in time to communicate and solve the problem for you. Please do not return and apply for a return without permission. Shopping Notes: 1. Surfing skateboards wading in water will cause the screws to rust and the surface of the board to deform. This is caused by the special properties of the product and is a normal phenomenon. It is not a quality problem. If you mind, please take it carefully. 2. Please do not touch the water or store it in a humid place for normal maintenance of the surfing skateboard to prevent the board surface from losing its elasticity and the bearings from rusting. 3. Lusurf skateboards are consumables. Whether sliding or moving, they will cause friction and collision with the ground, and the resulting loss is inevitable, which is a normal phenomenon. 4. There will be some sound when stepping on the front and rear pedals. This is the sound from the friction bridge of the front axle bracket. It is a normal phenomenon. Add a little lubricating oil or Wax block to the PU and the bracket to reduce the sound. 5. Before taxiing, check whether the speed of the four wheels is consistent. If the speed of the wheels is slow or stops suddenly, use a T-shaped tool to rotate the screws on the wheels counterclockwise to make the ride smooth. About color difference and size error: 1. Due to different lighting, display configurations, and personal understanding of colors, color differences are unavoidable, and the actual product shall prevail. 2. Size error: The size of the product is the official size of the brand owner. Due to the different measurement methods and measuring tools of each person, there will be a slight difference from the marked size. Please refer to the actual product. Return and exchange service: 1. Return notice Please contact customer service to communicate and take photos before returning or exchanging goods. The goods, packaging, accessories, manuals, etc. are brand new and confirmed with the customer before proceeding further with the return and exchange. If the goods, packaging, accessories and other manuals are missing or damaged, which will affect the secondary sales, returns cannot be processed. 2. The following situations cannot be returned or exchanged (1) If the goods are stepped on, bumped, scratched, damaged in appearance, or the goods have been used, have been modified, or the tag has been cut, they cannot be returned. (2) To return or exchange goods, the original packaging (carton, inflatable foam, filler) must be carefully packaged and sent back. The damage caused by the packaging cannot be returned or exchanged. (3) The product will not be returned or exchanged if the outer packaging of the product is damaged or the tape wrapped on the packaging affects the secondary sales.