Mountain of Gold, Mountain of Silver - Constant Temperature | Bedside Lamp | Salt Therapy | Natural Design | Desk Recommendation

.Product Specifications - Reference Size: 18cm x 15cm x 30cm, Reference Weight: 8kg ± 0.5kg (1) This salt lamp uses a smart salt therapy starter (HE-26024) (2) Constant temperature control, energy-saving and environmentally friendly, does not just heat. (3) Moving away from the traditional tungsten lamp heat source, an environmentally unfriendly structure, the new device's lifespan can be 30 times longer. (4) Constant temperature control allows the salt body's moisture absorption and evaporation to continuously cycle the process of generating negative ions, reaching the optimal state for air purification. Overheating repels moisture absorption, while being too cold reduces the power of negative ion generation. (5) No need to keep the lamp on 24 hours to prevent deliquescence. When you are out or sleeping, you can use the keep-warm, non-lighting mode to continuously generate negative ions and prevent deliquescence. https://live.staticflickr.com/65535/53717544623_ac484d912c_c.jpg (Far-infrared spectrometer showing internal temperature under constant temperature control) (6) Smart mood lighting design.. Breathing salt, golden warm tones, silver-white cool tones, easily matching the season and decor. https://live.staticflickr.com/65535/53733114701_31fcee29a4_k.jpg (7) World patent and international safety certification. https://live.staticflickr.com/65535/53717673674_7559e500d1_h.jpg https://live.staticflickr.com/65535/53717337396_1fd82d294a_k.jpg ____________________________________________________________________________ Operation Instructions Smart Salt Therapy Starter Installation: (1) The infrared remote control receiving wire must be placed outside the therapeutic salt lamp to receive remote control signals. (2) When plugged in for the first time, it will display in cold and warm light mode after power is supplied. 1. Install the smart salt therapy starter inside the salt body through the base. 2. Install the smart salt therapy starter between the base and the salt body. 3. Install the smart salt therapy starter in the container. https://live.staticflickr.com/65535/53717672264_132186b519_k.jpg ____________________________________________________________________________ MAINTENANCE AND NOTES 1. Regularly dust the surface of the salt body with a dry cloth to maintain its good light transmittance. This also helps the therapeutic salt lamp and the moisture in the air to continuously convert and operate effectively. 2. If soot or other stubborn dirt cannot be removed with a dry cloth, use a damp cotton cloth or sponge to remove dirt from the surface of the therapeutic salt lamp. Avoid immersing the therapeutic salt lamp in water as much as possible. 3. The therapeutic salt lamp can be placed in rooms, bathrooms, damp basements, etc., but ensure the smart salt therapy starter is operating normally to prevent the salt body from absorbing moisture and causing deliquescence. 4. To prevent condensation on the surface of the therapeutic salt lamp due to humid weather or accidental splashing, it is recommended to keep the smart salt therapy starter turned on or in a warm state to avoid this phenomenon. 5. It is recommended to keep the smart salt therapy starter on at all times for optimal performance. If the therapeutic salt lamp will not be used for a long time, wrap it in a plastic bag to protect it from moisture. 6. Avoid collisions or dropping to prevent breakage. <Notes> 1. Do not drop or apply heavy pressure to the remote control. 2. Do not mix [new and old] / [different brands] / [different materials] batteries, to avoid affecting the battery life and remote control function or causing damage. 3. If the remote control is not used for a long time, please remove the batteries to prevent battery leakage from damaging the remote control. 4. This product is suitable for general No. 4 dry batteries (1.5V AAA carbon-zinc batteries). Alkaline batteries are not recommended. <Service Description> 1. Damage caused by natural disasters or irresistible external forces. 2. Improper operation due to not following the user manual or operating instructions. 3. Disassembly or repair by unauthorized technicians of our company.