**Self-made lovely decorations 3D stereoscopic**
**Hand-made from start line infinite. Creative fingers pulled by the ever-changing**
Magiwire MAGIC line is malleable plastic line a very easy to use, when heated to 70 ℃ / 158 ° F above will melt, you can soften it and shaping in hot water. MAGIC line with the use of special plastic mold, making the accessory; then, according to the instructions eleven bonding assembly, making the tower, bird cage, animals, angels ..... like 3D printers and other print-out three-dimensional shape decoration. You can also play unlimited imagination, a self-made stereoscopic 3D modeling.
**◎◎◎ need to buy this product Magiwire MAGIC line with the mold in order to use ◎◎◎**
1. This product is not children's toys, children's use of this product should be accompanied by an adult.
2. Heat with hot water without much preparation; pay attention to safety when used.
3. Use water containers, plastic non-preferred. If plastic containers, test MAGIC line after the high-temperature cooling, will stick to the container.
4. MAGIC line as "thermal expansion" a slight shrinkage phenomenon, to avoid repeated heating MAGIC line.
5. NEVER connect the MAGIC wire for use in high temperature environments or applications, avoid the use of food preparation utensils or cutlery.
● a new generation of plastic
● low temperature melting point of 70 ℃ / 158 ° F and above
● Light weight, high strength
● non-toxic, environmentally friendly, does not contain heavy metals or plasticisers
● environmentally friendly materials, can naturally break down
(1) Prepare two water containers, for holding a hot water (70 degrees Celsius / 158 degrees Fahrenheit); another bloom cold water.
(2) The special plastic mold lines recess, clipping appropriate length Magical fill line; Pour hot water with a spoon to scoop the MAGIC soften bonding wire. Hot water does not need too much, as long as the line can MAGIC soften it.
(3) hand soft reduction bonding point, and then use cold water to cool and solidify; curing time required for a few seconds.
(4) to take advantage of all the parts to complete the mold; Referring again to FIG assembled complete assembly work. When assembled, with a spoon to scoop a little hot water poured over the bonding point, hand soft reduction to bonding point, and then use cold water to cool and solidify.
**◎ owned tool**
● water container 2
● small scissors
● small spoon
**◎ the product contents**
1. The special plastic mold
2. Chinese version of the operating manual (with teaching sites)
**◎ Age: 14 to 99 years old**
**◎ Product Specifications**
Size: 13Wx20Lx1H cm
Weight: 10 grams
Degree of difficulty: ★★★
Origin / manufacturing methods
Made in Taiwan